STMicroelectronics Manuals

LM119-LM219-LM319 is a precision high speed dual comparator designed to operate over a wide range of supply voltages. It features low input currents and high gains. The open collector of the output stage makes it compatible with TTL and capable of driving lamps and relays at currents up to 25mA.

This document describes the features of LF253 and LF353, two wide bandwidth dual JFET operational amplifiers. These amplifiers have low power consumption, wide common-mode and differential voltage range, low input bias and offset current, output short-circuit protection, high input impedance JFET input stage, internal frequency compensation, latch-up free operation, and high slew rate.

LF351 is a single JFET operational amplifier produced by ST company. It has the following features: internally adjustable input offset voltage, low power consumption, wide common-mode voltage range (up to VCC+), low input bias and offset current, output short-circuit protection, high input impedance JFET input stage, internal frequency compensation, no latch-up operation, high slew rate 16 V/µs (typical)

This document describes the features and characteristics of the LF147 - LF247 - LF347 series wideband quad J-FET operational amplifiers, including low power consumption, wide common-mode and differential voltage range, low input bias and offset currents, output short-circuit protection, high input impedance, internal frequency compensation, etc.

The L2726 is a monolithic integrated circuit in SO-20 package intended for use as power operational amplifiers in a wide range of applications including servo amplifiers and power supplies. It is particularly indicated for driving inductive loads, as motor and finds applications in compact-disc VCR automative, etc. The high gain and high output power capability provide superior performance whatever an operational amplifier/power booster combination is required.

L2720/2/4 is a low voltage dual power operational amplifier, which can output 1A current and supports single or split power supply. Its input voltage range is large, input offset voltage is low, output saturation voltage is low, and it has thermal shutdown function and clamp diode.

L272 is a dual power operational amplifier launched by STMicroelectronics, with a maximum output current of 1A, supporting single or dual power supply, commonly used in power amplifiers and switch power supplies.

The L165 is a 3A power operational amplifier with large common-mode and differential-mode ranges, SOA protection and thermal protection. It is intended for use in a wide range of applications, including servo amplifiers and power supplies.

RHFL4913A is a high-performance adjustable positive voltage regulator from ST. It has 3A low dropout voltage, embedded overtemperature and overcurrent protection, adjustable overcurrent limitation, output overload monitoring/signalling, adjustable output voltage, inhibit (ON/OFF) TTL-compatible control, programmable output short-circuit current, remote sensing operation and radiation resistance.

RHFL4913XX25 RHFL4913XX33 - RHFL4913XX50 is a high performance Rad-hard positive voltage regulator family, specifically intended for space and harsh radiation environments.

This is a document about Rad hard low voltage CMOS 16-bit bus buffer transceiver (3-state). The product features a voltage range of 1.65 to 3.6V for inputs and outputs, high-speed outputs, and 3.6V tolerance for inputs and outputs. It also has characteristics such as low power consumption, high-speed transmission, and radiation resistance.

This is a document about a low voltage CMOS 16-bit bus buffer transceiver (3-state). The product features include 1.65 to 3.6V inputs and outputs, high speed performance, 3.6V tolerance on inputs and outputs, power down protection, etc.

The 54VCXH162244 is a low voltage CMOS 16 bit bus buffer (non inverted) fabricated with sub-micron silicon gate and five-layer metal wiring C²MOS technology. It is ideal for low power and very high speed 1.65 to 3.6 V applications; it can be interfaced to 3.6 V signal environment for both inputs and outputs.

The 54VCXH162373 is a low voltage CMOS 16 bit d-type latch with 3 state outputs non inverting fabricated with sub-micron silicon gate and five- layer metal wiring C²MOS technology. It is ideal for low power and very high speed 1.65 to 3.6 V applications; it can be interfaced to 3.6 V signal environment for both inputs and outputs. These 16 bit D-type latches are bite controlled by two latch enable inputs (nLE) and two output enable inputs (OE). When nLE input is high, the latch will keep at its current state, when nLE input is low, the latch will go from low level to high level or from high level to low level, depending on the state of the OE input.

This is a low voltage CMOS 16-bit D-type flip-flop (3-state) with radiation hardened features and 3.6V tolerant inputs and outputs. It features high speed, symmetrical impedance outputs, power down protection on inputs and outputs, 26Ω series resistors in outputs, etc.