Texas Instruments manuals, page 94
TEXAS INSTRUEMENTS AM26LV32E-EP DATA SHEET
The AM26LV32E is a low-voltage high-speed quadruple differential line receiver with ±15 kV IEC ESD protection from Texas Instruments. It meets or exceeds TIA/EIA-422-B standard and ITU Recommendation V.11, has a single-chip package, and is powered by a single 3.3-V supply. It supports a working temperature range of -55°C to 125°C and supports partial power-down mode operation.
TEXAS INSTRUMENTS TUSB6020 Manual
The TUSB6020 is a USB 2.0 high-speed On-the-Go dual-role controller, featuring a USB On-the-Go controller core and an integrated USB 2.0 OTG PHY. It can operate either as a function controller for a USB peripheral or as the host/peripheral in point-to-point communications. The product is fully compliant with the USB 2.0 standard and USB 2.0 transceiver macrocell interface, supporting optimized one-port operation at low speed (1.5 Mbps), full speed (12 Mbps), and high speed (480 Mbps). It also supports the USB 2.0 supplement to OTG specification, with protection circuitry to withstand possible VBUS short, support for session request protocol (SRP) and host negotiation protocol (HNP), suspend-and-resume signaling, built-in self-test (BIST), and configurable FIFOs.
TEXAS INSTRUMENTS CD54/74FCT240 CD54/74FCT240AT CD54/74FCT241 CD54/74FCT244 CD54/74FCT244AT Manual
The data sheet provides the features of CD54/74FCT240, 240AT, 241, 244 and 244AT three-state eight-way buffers/line drivers, including inputs, outputs, power supply, package, compatibility, etc.
TEXAS INSTRUMENTS CD54/74HC123 CD54/74HCT123 CD74HC423 CD74HCT423 High Speed CMOS Logic Dual Retriggerable Monostable Multivibrators with Resets handbook
This data sheet lists the features and characteristics of CD54HC123, CD54HCT123, CD74HC123, CD74HCT123, CD74HC423, CD74HCT423.
TEXAS INSTRUMENTS TUSB2043 4-PORT HUB FOR THE UNIVERSAL SERIAL BUS WITH OPTIONAL SERIAL EEPROM INTERFACE handbook
The TUSB2043 is a 4-port USB hub that is compliant with the USB 1.1 specification, low power, supports 1.8V and 3.3V power supply, integrated USB transceivers, using a state machine, no programming.
TEXAS INSTRUMENTS SN75971B SCSI DIFFERENTIAL CONVERTER-DATA datasheet
TEXAS INSTRUMENTS TPS2045A TPS2046A TPS2047A TPS2048A TPS2055A handbook
The TPS2045A through TPS2048A and TPS2055A through TPS2058A power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices incorporate 80-mΩ N-channel MOSFET high-side power switches for power-distribution systems.
TEXAS INSTRUMENTS TIBPAL16R6-30M TIBPAL16R8-30Mhandbook
The TIBPAL16L8-25C, TIBPAL16R4-25C, TIBPAL16R6-25C, TIBPAL16R8-25C TIBPAL16L8-30M, TIBPAL16R4-30M, TIBPAL16R6-30M, TIBPAL16R8-30M are low-power, high-performance IMPACT PAL circuits that combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-performance substitutes for conventional TTL logic. These circuits are easy to program and can quickly design custom functions, typically resulting in a more compact circuit board. In addition, chip carriers are available for further reduction in board space. The TIBPAL16' C series is characterized by its high speed and functional equivalency, making it an ideal replacement for current available devices.
TEXAS INSTRUMENTS TL080 TL081 TL082 TL084 TL081A TL082A TL084A TL081B TL082B TL084B TL082Y TL084Y JFET-INPUT OPERATIONAL AMPLIFIERShandbook
This data sheet is about TL080, TL081, TL082, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B, TL082Y, TL084Y JFET-INPUT OPERATIONAL AMPLIFIERS.
TEXAS INSTRUMENTS TPS77101/115/118/127/128/133/150 WITH RESET OUTPUT TPS77201/215/218/227/228/233/250 WITH POWER GOOD OUTPUT 150-mA LDO REGULATORS WITH 8-PIN MSOP PACKAGINGhandbook
The TPS771xx and TPS772xx are low-dropout regulators with integrated power-on reset and power good (PG) function respectively. These devices are capable of supplying 150 mA of output current with a dropout of 115 mV (TPS77133, TPS77233). Quiescent current is 92 µA at full load dropping down to 1 µA when device is disabled. These devices are optimized to be stable with a wide range of output capacitors including low ESR ceramic (10 µF) or low capacitance (1 µF) tantalum capacitors. These devices have ex- tremely low noise output performance (55 µVrms) without using any added filter capacitors. TPS771xx and TPS772xx are designed to have fast transient response and thermal shutdown protection.
TEXAS INSTRUMENTS TLE206X Data Sheet
This is a low-power, high-gain amplifier that can be used in applications that require high gain and high output current.
TEXAS INSTRUMENTS TPS2045A TPS2046A TPS2047A TPS2048A handbook
The TPS2045A through TPS2048A and TPS2055A through TPS2058A power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices incorporate 80-mΩ N-channel MOSFET high-side power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by an independent logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit threshold or a short is present, these devices limit the output current to a safe level by switching.
TEXAS INSTRUMENTS SN54F243 SN74F243 QUADRUPLE BUS TRANSCEIVERS WITH 3-STATE OUTPUTS handbook
This document describes the features and characteristics of the SN54F243 and SN74F243 quadruple bus transceivers. These transceivers are designed for asynchronous communication between data buses and offer flexible timing. They allow data transmission from the A bus to the B bus or from the B bus to the A bus based on the logic levels at the output-enable (OEBA and OEAB) inputs. The output-enable inputs can be used to disable the device, effectively isolating the buses. The dual-enable configuration allows the quadruple bus transceivers to store data by simultaneously enabling OEBA and OEAB. In this configuration, each output reinforces its input. Therefore, when both control inputs are enabled and all other data sources to the two sets of bus lines are in a high-impedance state, both sets of bus lines (eight in total) maintain their states. The 4-bit codes appearing on the two sets of buses will be identical for the ′F243. The SN54F243 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74F243 is characterized for...
TEXAS INSTRUMENTS TSB82AA2B 1394b OHCI-Lynx CONTROLLER handbook
The TSB82AA2B OHCI-Lynx™ Controller is a discrete 1394b link-layer device that provides the functionality of a single-chip 1394b OHCI controller and 1394b peripheral bridge.
TEXAS INSTRUMENTS PCM1739handbook
The PCM1739 is a digital-to-analog converter produced by Burr-Brown. It is manufactured using CMOS technology and supports 24-bit analog output. It supports 16-bit and 24-bit data and supports sampling rates of 10kHz to 192kHz.