Texas Instruments manuals, page 45
TEXAS INSTRUMENTS THS1007 handbook
The THS1007 is a low-power, 10-bit, 6 MSPS analog-to-digital converter (ADC) that is suited for applications in radar, imaging, high-speed acquisition, and communications. It features a multistage pipelined architecture with output error correction logic that provides for no missing codes over the full operating temperature range. Internal control registers are used to program the ADC into the desired mode. The THS1007 consists of four analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. Internal reference voltages for the ADC (1.5 V and 3.5 V)
TEXAS INSTRUMENTS THS1206 THS12082 THS10064 THS10082 user manual
This user’s guide serves as a reference book for the THS1206/THS12082/THS10064/THS10082 evaluation module. It describes the operation and usage of the 12-bit THS1206/THS12082 and 10-bit THS10064/THS10082 analog-to-digital converter (ADC) evaluation modules.
TEXAS INSTRUMENTS THS10064 handbook
The THS10064 is a 10-bit 6 MSPS single-chip ADC, using low-power CMOS technology, with a 16-word FIFO buffer, working voltage 3V or 5V, and is mainly used in radar, communication, control, high-bandwidth DSP front-end and other fields
TEXAS INSTRUMENTS THS0842 EVM user manual
This guide describes data conversion features of Texas Instruments' AAP products.
TEXAS INSTRUMENTS THS0842 handbook
The THS0842 is a dual-input, 8-bit, 40 MSPS low-power analog-to-digital converter with single or dual parallel bus output. It features dual simultaneous sample and hold inputs, differential or single-ended analog inputs, 8-bit resolution 40 MSPS sampling analog-to-digital converter, and single or dual parallel bus output.
TEXAS INSTRUMENTS TLC7528C TLC7528E TLC7528I DUAL 8-BIT MULTIPLYING DIGITAL-TO-ANALOG CONVERTERS datasheet
The TLC7528C, TLC7528E, and TLC7528I are three 8-bit dual-channel multiplying digital-to-analog converters from Texas Instruments, with high precision and high reliability, supporting 15V power supply.
TEXAS INSTRUMENTS TLC27M2 TLC27M2A TLC27M2B TLC27M7 LinCMOS PRECISION DUAL OPERATIONAL AMPLIFIERShandbook
The TLC27M2, TLC27M2A, TLC27M2B, TLC27M7 LinCMOS PRECISION DUAL OPERATIONAL AMPLIFIERS is a low noise, low power, single supply operation operational amplifier. It features a wide range of supply voltages, large output voltage range, small input offset voltage, low input impedance, designed-in latch-up immunity and ESD protection circuitry.
TEXAS INSTRUMENTS TL3116 TL3116Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS handbook
The TL3116 is an ultra-fast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ±5-V supplies. The input common-mode voltage extends to the negative rail for ground sensing applications. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal.
TEXAS INSTRUMENTS TL05x TL05xA TL05xY ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS handbook
TL05x, TL05xA, TL05xY ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS is a low offset operational amplifier released by TI. This series of products has improved DC accuracy and faster conversion rate, while the power consumption is also lower. It can be used to upgrade existing circuits or to obtain the best performance in new designs.
TEXAS INSTRUMENTS TIBPAL22VP10-20C TIBPAL22VP10-25M HIGH-PERFORMANCE IMPACT-X PROGRAMMABLE ARRAY LOGIC CIRCUITS handbook
TIBPAL22VP10-20C/25M is a high-performance programmable array logic circuit produced by TI. It is functionally equivalent to TIBPAL22V10/10A, but adds feedback paths in the output logic macrocell. It offers a choice of 20 ns or 25 ns maximum operating speed. All outputs can be user programmable for registered or combinational operation, polarity, and output enable control. TTL level preload is provided for improved testability.
TEXAS INSTRUMENTS TIBPAL16R4-10C TIBPAL16R6-10C TIBPAL16R8-10C TIBPAL16R4-12M TIBPAL16R6-12M TIBPAL16R8-12M HIGH-PERFORMANCE IMPACT-X PAL CIRCUITS Data Sheet
This document is about TIBPAL16L8-10C, TIBPAL16R4-10C, TIBPAL16R6-10C, TIBPAL16R8-10C TIBPAL16L8-12M, TIBPAL16R4-12M, TIBPAL16R6-12M, TIBPAL16R8-12M HIGH-PERFORMANCE IMPACT-X PAL CIRCUITS products' production data. It contains information about the products' features and characteristics, such as high performance, functionality, and product models and brands.
TEXAS INSTRUMENTS THS4041 THS4042 165-MHz C-STABLE HIGH-SPEED AMPLIFIERS handbook
The THS4041/2 165MHz C-Stable High-Speed Amplifiers are single/dual, high-speed voltage feedback amplifiers capable of driving any capacitive load.
TEXAS INSTRUMENTS SN75C198 handbook
SN75C198 is a quadruple low-power line driver that meets the specifications of ANSI EIA/TIA-232-E and ITU Recommendation V.28. It has very low supply current and ultra-low supply current, and is an improved functional replacement for SN75188, Motorola MC1488, National Semiconductor DS14C88, and DS1488. It has CMOS- and TTL-compatible data inputs, with a controlled-output slew rate of 30 V/µs and an output current limit of 10 mA. It is characterized for operation from 0°C to 70°C.
TEXAS INSTRUMENTS SN74V3640 SN74V3650 SN74V3660 SN74V3670 SN74V3680 SN74V3690 handbook
The SN74V3640, SN74V3650, SN74V3660, SN74V3670, SN74V3680, and SN74V3690 are 3.3-V CMOS FIFOs with selectable depth and bandwidth to meet the needs of a variety of applications. These devices feature low power and high performance, making them ideal for communication, consumer electronics, and computing applications.
TEXAS INSTRUMENTS SN54HC32 SN74HC32 QUADRUPLE 2-INPUT POSITIVE-OR GATES handbook
SN54HC32, SN74HC32 are quad 2-input positive-OR gates produced by Texas Instruments. Its input voltage range is 2 V to 6 V, the output can drive 10 LSTTL loads, the power consumption is small, the input current is 1 µA max, the typical tpd is 8 ns, and the output current is 5 V ±4 mA.