Texas Instruments manuals, page 40
texas instruments SN54AHCT595 SN74AHCT595 8-BIT SHIFT REGISTERS WITH 3-STATE OUTPUT REGISTERS
SN54AHCT595, SN74AHCT595 are 8-bit serial-in, parallel-out shift registers with 3-state output registers.
TEXAS INSTRUMENTS SN65LVDS387 SN75LVDS387 SN65LVDS389 SN75LVDS389 SN65LVDS391 SN75LVDS391 HIGH-SPEED DIFFERENTIAL LINE DRIVERS handbook
SN65LVDS387, SN75LVDS387, SN65LVDS389 SN75LVDS389, SN65LVDS391, SN75LVDS391 is a high-speed differential line driver produced by TI company. It meets or exceeds the ANSI EIA/TIA-644 standard and is designed for signaling rates up to 630 Mbps with very low radiation (EMI). Low-voltage differential signaling with typical output voltage of 350 mV and a 100-Ω load. Propagation delay times less than 2.9 ns, output skew is less than 150 ps, part-to-part skew is less than 1.5 ns, each driver has a total power dissipation of 35 mW at 200 MHz, the driver is in high impedance when disabled or VCC < 1.5 V, the SN65 version bus-pin ESD protection exceeds 15 kV, and it is packaged in a thin shrink small-outline package with a 20-mil terminal pitch. Low-Voltage TTL (LVTTL) logic inputs are 5-V tolerant.
TEXAS INSTRUMENTS SN74LVC1G07 SINGLE BUFFER/DRIVER WITH OPEN-DRAIN OUTPUT handbook
The SN74LVC1G07 is a single buffer/driver from TI with open drain output. It supports 1.65-V to 5.5-V VCC operation and has a maximum sink current of 32 mA. It can be used in partial power down applications.
TEXAS INSTRUMENTS SN5408 handbook
SN5408, SN54LS08, SN54S08 SN7408, SN74LS08, SN74S08 QUADRUPLE 2-INPUT POSITIVE-AND GATES.
TEXAS INSTRUMENTS OPA703 handbook
The OPA703 series of operational amplifiers are rail-to-rail input and output, single supply, and are specified and guaranteed over the supply range of ±2V to ±6V. The OPA703 series have low quiescent current, low offset voltage, and high gain bandwidth product, and are suitable for automotive, portable equipment, test equipment, and data acquisition applications.
TEXAS INSTRUMENTS ADS8343 Data Sheet
The ADS8343 is a 16-bit, 4-channel serial output sampling analog-to-digital converter with features such as bipolar input range, pin-for-pin compatibility with the ADS7841 and ADS8341, single supply operation from 2.7V to 5V, 4-channel single-ended or 2-channel differential input, up to 100kHz conversion rate, 86dB SINAD, and a serial interface.
TEXAS INSTRUMENTS ADS7807 Data Sheet
The ADS7807 is a low-power, 16-bit, sampling Analog-to-Digital (A/D) converter with features such as 35mW maximum power dissipation, 50µW power-down mode, 25µs maximum acquisition and conversion time, ±1.5LSB maximum INL, 16-bit DNL with no missing codes, 86dB minimum SINAD with 1kHz input, ±10V, 0V to +5V, and 0V to +4V input ranges, single +5V supply operation, parallel and serial data output, pin-compatible with the 12-bit ADS7806, and the ability to use internal or external reference.
TEXAS INSTRUMENTS REF2912 Data Sheet
REF2912 REF2920 REF2925 REF2930 REF2933 REF2940 is a precision, low-power, low-voltage dropout voltage reference family from Texas Instruments, available in a tiny SOT23-3 package. The REF29xx's small size and low power consumption (50µA max) make it ideal for portable and battery-powered applications. The REF29xx does not require a load capacitor, but is stable with any capacitive load. Unloaded, the REF29xx can be operated with supplies within 1mV of output voltage. All models are specified for the wide temperature range, –40°C to +125°C.
TEXAS INSTRUMENTS SLTS163 handbook
The PT7615 is a 20-A low-voltage programmable integrated switching regulator from Texas Instruments (TI). It features a 5V input and an output voltage range of 1.075V to 1.85V in 25mV steps. It is VRM 9.0 compliant.
TEXAS INSTRUMENTS SLTS154 handbook
The PT6980 series is a dual output integrated switching regulator (ISR) designed specifically to power mixed signal ICs. Operating from a 12-V input bus, the dual output provides power for both the digital I/O logic and a DSP core from a single module. Both output voltages are internally sequenced during power-up and power-down to comply with the requirements of the latest DSP chips. Each output is inde- pendently adjustable or can be set to at least one alternative bus voltage with a simple pin-strap. The modules are made available in a space-saving solderable case. The features include output current limit and short-circuit protection.
TEXAS INSTRUMENTS SLTS028B datasheet
The PT5100 modules are a series of economical, easy-to-use 1-A positive step-down, Integrated Switching Regulators (ISRs). These ISRs are compatible with most TO-220 style linear regulators, and when employed as a linear replacement, provide significant benefits in both efficiency and power dissipation. They are recommended for use in a wide variety of on-board power regulation applications. These include computer, data storage, industrial controls, and battery powered equipment. Modules are laser-trimmed for optimal output voltage accuracy, and exhibit excellent line and load regulation. The PT5100 also features output current limiting and thermal shutdown protection.
TEXAS INSTRUMENTS TPS735xx handbook
TPS735xx low-dropout linear regulators provide 500mA output current with low quiescent current, ultra-low noise and high PSRR
TEXAS INSTRUMENTS TPS40056 handbook
The document describes the features and characteristics of the TPS40056, including the operating input voltage range, output voltage tracking, programmable fixed-frequency voltage mode controller, etc.
TEXAS INSTRUMENTS TPIC5203 2-CHANNEL INDEPENDENT GATE-PROTECTED POWER DMOS ARRAY handbook
The TPIC5203 is a high voltage switch transistor produced by Texas Instruments. It has a maximum output voltage of 60V and a maximum output current of 8A.
TEXAS INSTRUMENTS SN54BCT244 SN74BCT244 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS Data Sheet
SN54BCT244, SN74BCT244 are octal buffers/drivers with 3-state outputs, designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.