Texas Instruments manuals, page 42
TEXAS INSTRUMENTS SN54ABT16657 SN74ABT16657 16-BIT TRANSCEIVERS WITH PARITY GENERATORS/CHECKERS AND 3-STATE OUTPUTS handbook
SN54ABT16657 and SN74ABT16657 are 16-bit transceivers with parity generators/checkers and 3-state outputs. They feature state-of-the-art EPIC-ΙΙB BiCMOS design that significantly reduces power dissipation and exceeds JEDEC standard JESD-17 latch-up performance. The products have distributed VCC and GND pin configuration to minimize high-speed switching noise. They utilize a flow-through architecture for optimized PCB layout. The high-drive outputs (–32-mA IOH, 64-mA IOL) provide strong output capabilities. Package options include plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) packages, as well as 380-mil Fine-Pitch Ceramic Flat (WD) package with 25-mil center-to-center spacings.
TEXAS INSTRUMENTS SN54ABT16646 SN74ABT16646 16-BIT BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS handbook
16-bit bus transceivers and registers with 3-state outputs
TEXAS INSTRUMENTS SN54ABT16543 SN74ABT16543 16-BIT REGISTERED TRANSCEIVERS WITH 3-STATE OUTPUTS handbook
This data sheet provides detailed information about SN54ABT16543, SN74ABT16543 16-bit registered transceivers.
TEXAS INSTRUMENTS SN54ABT16541 SN74ABT16541A 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS handbook
SN54ABT16541 and SN74ABT16541A are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals.
TEXAS INSTRUMENTS SN54ABT16374A SN74ABT16374A handbook
SN54ABT16374A, SN74ABT16374A are 16-bit edge-triggered D-type bidirectional flip-flops with 3-state outputs specifically designed for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.
TEXAS INSTRUMENTS SN54ABT16373A SN74ABT16373A handbook
SN54ABT16373A, SN74ABT16373A are 16-bit transparent D-type latches with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a n
TEXAS INSTRUMENTS SN54ABT162827A SN74ABT162827A handbook
ABT162827A is a 20-bit non-inverting buffer from TI with independent output enable signals. The output ports have equivalent 25-ohm series resistors, so no external resistors are required. During power on and off, it is in the high impedance state. The typical VOLP (output ground bounce) is less than 1V at VCC=5V, TA=25°C. Distributed VCC and GND pins minimize high-speed switching noise. Ioff and power-up 3-state support hot insertion. The flow-through architecture optimizes PCB layout. Latch-up performance exceeds 500 mA per JEDEC Standard JESD-17. ESD protection exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A)
TEXAS INSTRUMENTS SN54ABT16244 SN74ABT16244A handbook
SN54ABT16244 and SN74ABT16244A are 16-bit buffers and line drivers specifically designed to improve the performance and density of 3-state memory address drivers, closed-loop control logic, and other high-speed applications.
TEXAS INSTRUMENTS SN54ABT162245 SN74ABT162245 handbook
The SCBS239F is a 16-bit noninverting 3-state transceiver designed for synchronous two-way communication between data buses. It features no external resistors required, low output ground bounce, distributed VCC and GND pins, and support for partial-power-down mode operation.
TEXAS INSTRUMENTS THS3201 handbook
The THS3201 is a wide-band, high-speed current-feedback amplifier, designed to operate over a wide supply range of ±3.3 V to ±7.5 V for todays high performance applications. It features a unity gain bandwidth of 1.8 GHz, a high slew rate of 10500 V/µs, and low distortion performance, making it ideal for arbitrary waveform driver applications and driving high-resolution, high-sampling rate ADCs. Additionally, the THS3201 is well-suited for broadcast video and HDTV applications.
TEXAS INSTRUMENTS THS3110 THS3111 handbook
This datasheet provides characteristics, specifications and application information for the THS3110 and THS3111 low-noise, high-voltage, current-feedback operational amplifiers. The THS3110 and THS3111 are low-noise, high-voltage, current-feedback amplifiers designed for operation over a wide supply range of ±5 V to ±15 V for today's high performance applications.
TEXAS INSTRUMENTS THS3112 THS3115 handbook
This document is about the THS3112/5 datasheet, introducing the features of the THS3112/5 product, including low noise, high speed, large output current, high speed, low distortion and other features.
TEXAS INSTRUMENTS THS3120 THS3121 handbook
The THS3120 and THS3121 are low-noise, high-voltage, high output current drive, current-feedback amplifiers designed to operate over a wide supply range of ±5 V to ±15 V for today's high performance applications.
TEXAS INSTRUMENTS THS3122 THS3125 handbook(1)
THS3122/5 is a low noise, high speed, high output current driver that can drive heavy loads with low distortion over a wide frequency range.
TEXAS INSTRUMENTS THS3122 THS3125 handbook
This document introduces TI's THS3122/5 series of low-noise, high-speed current feedback amplifiers, which have high output current drive capabilities and are ideal for applications requiring low distortion over a wide frequency range with heavy loads.