ANALOG Manuals

The AD9201 is a dual channel, 20 MSPS, 10-bit CMOS ADC from Analog Devices. The AD9201 is optimized specifically for applications where close matching between two ADCs is required (e.g., I/Q channels in communications applications).

The AD7827 is a high speed, single channel, low power, analog-to-digital converter with a maximum throughput of 1 MSPS that operates from a single 3 V or 5 V supply.

The AD7339 is a composite IC that contains both DAC and ADC functions. The device includes an 8-bit parallel A-to-D converter. Two 8-bit parallel DACs are also included as are two serial control DACs. The AD7339, which operates with a single 5 V power supply, has a bandgap reference on board with a power-down mode.

The AD6640 is a high performance, low power, 12-bit analog-to-digital converter that runs on a single 5 V supply and supports 65 MSPS sample rate. It is designed for use in multichannel, multimode receivers, cellular/PCS base stations, and other applications.

AD9225 is a monolithic single-supply 12-bit 25 MSPS analog-to-digital converter with an on-chip, high performance sample-and-hold amplifier and voltage reference, features low power dissipation, no missing codes, guaranteed differential nonlinearity error, complete on-chip sample-and-hold amplifier and voltage reference, signal-to-noise and distortion ratio 71 dB, spurious-free dynamic range -85 dB, out-of-range indicator, straight binary output data, 28-lead SOIC and 28-lead SSOP compatible with 3 V logic.

The AD9051 is a complete 10-bit monolithic sampling analog-to-digital converter (ADC) with an onboard track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only 5 V and an encode clock to achieve 60 MSPS sample rates with 10-bit resolution. The encode clock is TTL compatible and the digital outputs are CMOS; both can operate with 5 V/3 V logic. The two-step architecture enables higher sampling rates and lower power consumption.

The AD7863 is a high speed, low power, dual 14-bit analog-to-digital converter that operates from a single 5 V supply. It features two fast 14-bit ADCs, four input channels, simultaneous sampling and conversion, 5.2 μs conversion time, and single supply operation.

The AD7856 is a high speed, low power, 14-bit ADC that operates from a single 5 V power supply. It has automatic calibration, flexible power management, multiple input ranges, multiple input channels, self- and system calibration, and a versatile serial I/O port.

The AD7723 is a complete 16-bit sigma-delta ADC. The part operates from a 5 V supply. The analog input is continuously sampled, eliminating the need for an external sample-and-hold. The modulator output is processed by a finite impulse response (FIR) digital filter. The on-chip filtering combined with a high oversampling ratio reduces the external antialias requirements to first order in most cases. The digital filter frequency response can be programmed to be either low-pass or band-pass. The AD7723 provides 16-bit performance

The AD6600 is a dual-channel, 20 MSPS mixed-signal receiver chip that supports 70 MHz to 250 MHz IF input frequencies and is designed for use in PCS/cellular base stations, GSM, CDMA, TDMA, wireless local loop, and fixed access applications.

This document introduces the features and characteristics of AD9283 8-Bit, 50 MSPS/80 MSPS/100 MSPS 3 V A/D Converter, including low power consumption, 475 MHz Analog Bandwidth, SNR = 46.5 dB @ 41 MHz at 100 MSPS, 1 V p-p Analog Input Range, Single 3.0 V Supply Operation (2.7 V–3.6 V), Power-Down Mode: 4.2 mW, etc.

AD7894 is a fast 14-bit ADC that operates from a single +5V supply and is housed in a small 8-lead SOIC package. The device features a 5µs successive approximation A/D converter, an on-chip track/hold amplifier, an on-chip clock, and a high-speed serial interface. Output data from the AD7894 is provided via a high-speed serial interface port. The product has high input impedance, low power consumption, and is a pin-compatible upgrade of the 12-bit AD7895.

The AD7887 is a 2-channel, 12-bit ADC with a voltage range of 2.7 V to 5.25 V. It operates at a micro-power level and has a sampling rate of 125 kSPS. It features flexible power/throughput rate management, a shutdown mode with a maximum current of 1 μA, and is suitable for battery-powered systems, instrumentation and control systems, and other applications.

This file introduces the features and characteristics of the AD7729 analog device, including working voltage, interface type, AD conversion rate, digital filter, output code format, etc.