ANALOG Manuals

AD7654 is a 16-bit, 500kSPS dual-channel analog-to-digital converter manufactured by American Analog Devices.

The AD9244 is a 14-bit, 40 MSPS/65 MSPS ADC that features low power, high accuracy, and high dynamic range.

The AD9238 is a dual, 3V, 12-bit, 20 MSPS/40 MSPS/65 MSPS analog-to-digital converter (ADC). It features dual high performance sample-and-hold amplifiers, operates on a 3V supply, and has a signal-to-noise ratio (SNR) of 70 dB and a spurious-free dynamic range (SFDR) of 80.5 dBc. It is suitable for applications such as ultrasound equipment, direct conversion or IF sampling receivers, WB-CDMA, CDMA2000, WiMAX, battery-powered instruments, handheld scopemeters, and low-cost digital oscilloscopes.

The AD7927 is a 12-bit high speed low power 8-channel successive approximation ADC. It operates from a single 2.7V to 5.25V power supply and features throughput rates up to 200 kSPS. The part contains a low noise, wide bandwidth analog front end, supports single-ended inputs, and has 8 input channels.

The AD7910/AD7920 are 250kSPS, 10/12-bit ADCs from Analog Devices that can be used in battery-powered systems, personal digital assistants, medical instruments, mobile communications, instrumentation and control systems, data acquisition systems, high speed modems and optical sensors.

AD7908/AD7918/AD7928 are 8-channel, 1 MSPS, 8-/10-/12-bit ADCs with a sequencer. They have fast throughput rates, low power consumption, and wide input bandwidth. They support flexible power/serial clock speed management, have a high-speed serial interface and shutdown mode. They are qualified for automotive applications.

The AD7734 is a high precision, high throughput analog front end. It has a true 16-bit p-p resolution with a total conversion time of 500 µs (2 kHz channel switching), making it ideally suited for high resolution multiplexing applications. The part can be configured via a simple digital interface, which allows users to balance the noise performance against data throughput up to a 15.4 kHz. The analog front end features four single-ended input channels with unipolar or true bipolar input ranges to ±10 V while operating from a single +5 V analog supply. The part has an overrange and underrange detection capability and accepts an analog input overvoltage protection.

The AD7732 is a high precision, high throughput analog front end from TI, which features 24-bit resolution, 2 fully differential analog input channels, single supply operation, support 5V or 3V digital supply, SPI, QSPI, MICROWIRE, DSP compatible interface. It can be used in PLC/DCS, multiplexing applications, process control, industrial instrumentation and other occasions.

The AD7655 is a 4-channel, 16-bit, 1 MSPS PulSAR® ADC with low cost, low power, low latency, serial and parallel interfaces, and flexible packaging.

The AD9878 Rev. A is a low cost 3.3 V CMOS MxFE™ for broadband applications. It is compliant with DOCSIS, EURO-DOCSIS, DVB and DAVIC standards and features a 232 MHz quadrature digital upconverter, a 12-bit direct IF DAC (TxDAC+), up to a 65 MHz carrier frequency DDS, programmable sampling clock rates, an analog Tx output level adjust, dual 12-bit, 29 MSPS direct IF ADCs with video clamp input, a 10-bit, 29 MSPS sampling ADC, and an 8-bit ∑-∆ auxiliary DAC, which can be directly interfaced to AD832x family of PGA cable drivers.

The AD9245 is a monolithic, single 3 V supply, 14-bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS analog-to-digital converter (ADC) featuring low power, flexible analog input, and clock duty-cycle stabilizer.

AD9236 is a monolithic, single 3 V supply, 12-bit, 80 MSPS analog-to-digital converter featuring a high performance sample- and-hold amplifier (SHA) and voltage reference. The AD9236 uses a multistage differential pipelined ADC architecture with 12-bit digital output, operating with a 2 V p-p or higher analog input voltage. AD9236 is suitable for a variety of demanding applications including high end medical imaging equipment, IF sampling in communications receivers, WCDMA, CDMA-One, CDMA-2000, battery powered instruments, hand-held scopemeters, low cost digital oscilloscopes and DTV subsystems.

AD7739 is an 8-channel, high throughput, 24-bit ∑-∆ ADC with features such as high resolution, optimized fast channel switching, configurable inputs, and on-chip per channel system calibration. It is suitable for applications such as PLCs/DCSs, multiplexing, process control, and industrial instrumentation.

AD7466/AD7467/AD7468 is a 1.6V, micropower 12-/10-/8-bit ADC with low power, high throughput rate, wide input bandwidth and other features.