ANALOG Manuals

ADN2813 is a Clock and Data Recovery IC with Integrated Limiting Amp that supports continuous rate of 10 Mb/s to 1.25 Gb/s. It exceeds SONET requirements for jitter transfer/generation/tolerance and features adjustable quantizer sensitivity, adjustable slice level, and no reference clock requirement.

The ADN2814 is a continuous rate 10 Mb/s to 675 Mb/s clock and data recovery IC with integrated limiting amp

The ADN2815 is a Clock and Data Recovery IC that supports continuous data rates from 10 Mb/s to 1.25 Gb/s. It exceeds SONET requirements for jitter transfer/generation/tolerance and does not require an external reference clock.

The ADN2816 is a clock and data recovery IC from Analog Devices that provides 10 Mb/s to 675 Mb/s of continuous data rates. The IC has a patented clock recovery architecture, does not require a reference clock, and has a loss-of-lock indicator. The ADN2816 also has an I2C interface to access optional features.

This document describes the features and characteristics of Analog Devices' ADN2817/ADN2818 Clock and Data Recovery ICs, which support a continuous rate of 10 Mbps to 2.7 Gbps.

ADN2819 is a clock and data recovery IC with integrated limiting amp produced by Analog Devices

ADN2865 is a clock and data recovery IC that supports 12.3Mb/s to 2.7Gb/s continuous rate and has a built-in loop-timed SERDES.

The ADF4360-7 is an integrated integer-N synthesizer and voltage controlled oscillator (VCO)

The ADF4360-6 is a fully integrated integer-N synthesizer and voltage-controlled oscillator (VCO) designed for a center frequency of 1150 MHz. It features a wide output frequency range, programmable output power level, and a 3-wire serial interface.

The ADF4360-5 is a fully integrated integer-N synthesizer and voltage-controlled oscillator (VCO). It is designed for a center frequency of 1300 MHz. In addition, a divide-by-2 option is available, whereby the user gets an RF output of between 600 MHz and 700 MHz. Control of all the on-chip registers is through a simple 3-wire interface.

The ADF4360-4 is a fully integrated integer-N synthesizer and voltage-controlled oscillator (VCO). It features an output frequency range of 1450 MHz to 1750 MHz, a divide-by-2 output, a power supply of 3.0V to 3.6V, 1.8V logic compatibility, a programmable dual-modulus prescaler, and programmable output power level. It is suitable for applications such as wireless handsets (DECT, GSM, PCS, DCS, WCDMA), test equipment, wireless LANs, and CATV equipment.

The ADF4360-3 is a fully integrated integer-N synthesizer and voltage controlled oscillator (VCO). It has an output frequency range of 1600 MHz to 1950 MHz, a power supply of 3.0 V to 3.6 V, 1.8 V logic compatibility, a programmable dual-modulus prescaler with options of 8/9, 16/17, and 32/33, programmable output power level, a 3-wire serial interface, analog and digital lock detect, and hardware and software power-down mode. It is suitable for applications such as wireless handsets, test equipment, wireless LANs, and CATV equipment.

The ADF4007 is a high frequency divider/PLL synthesizer that can be used in a variety of communications applications. It can operate to 7.5 GHz on the RF side and to 120 MHz at the PFD. It consists of a low noise digital PFD (phase frequency detector), a precision charge pump, and a divider/prescaler. The divider/prescaler value can be set by two external control pins to one of four values (8, 16, 32, or 64).

This document introduces Analog Devices ADF4360-0 integrated synthesizer and VCO, including output frequency range, power supply range, logic compatibility, synthesizer type, prescaler, output power level, serial interface, locking detection, power saving mode, etc.