ANALOG Manuals

The AD9806 is a complete analog signal processor for CCD applications. It features an 18 MHz single-channel architecture, supporting 0 dB to 34 dB gain range of low noise PGA, low noise clamp circuits and analog pre-blanking function.

The AD594/AD595 is an integrated temperature sensor with cold junction compensation, which can be used with Type J, Type K and Type T thermocouples. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a thermocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output. The AD594/AD595 includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible format which includes TTL driver output, integrated circuit driver output and passive decoder output.

The ADuC812 is an 8051-based microcontroller core with 8-channel 12-bit ADC and embedded Flash, with high precision, high speed and low power consumption.

The AD8307 is a low cost DC-500MHz, 92dB logarithmic amplifier. It features a complete multistage logarithmic amplifier, 92dB dynamic range, single supply operation of 2.7V, and can be powered up in 100ns.

AD1955 is a high performance multibit sigma-delta DAC chip launched by AD company, supporting 24-bit 192kHz PCM audio data and SACD audio data.

ADG1233/ADG1234 triple/quad SPDT ±15 V/+12 V i CMOS switches, featuring 1.5 pF off capacitance and 0.5 pC charge injection, a supply range of 33 V, a logic-compatible input voltage range of 3 V, a typical on resistance of 120 Ω, and TSSOP, LFCSP packages. Typical power consumption is less than 0.03 μW

The ADG849 is a monolithic, CMOS SPDT switch that operates with a supply range of 1.8V to 5.5V. It features ultralow on-resistance, excellent audio performance, high current carrying capability, and is suitable for a wide range of applications.

The Analog Devices ADF4206/ADF4207/ADF4208 dual RF PLL frequency synthesizers are high performance, low power, low cost, small size PLL frequency synthesizers that can achieve a frequency range of 550 MHz to 2.0 GHz. It has a 2.7 V to 5.5 V power supply voltage, an optional charge pump supply (VP), allows extended tuning voltage in 3 V systems, optional charge pump currents, an integrated oscillator circuit, an optional dual modulus prescaler (RF2: 32/33 or 64/65, RF1: 32/33 or 64/65), a 3-wire serial interface and a power-down mode. This product is widely used in wireless handsets (GSM, PCS, DCS, CDMA, WCDMA, LTE, etc.), portable computers, automotive electronics, satellite communications, industrial control, medical equipment and other applications.

AD8510/AD8512/AD8513 are precision, low noise, low input bias current, wide bandwidth JFET operational amplifiers. They feature fast settling time, low offset voltage, low temperature drift, low input bias current, dual-supply operation, low noise, low distortion, etc. They are suitable for applications such as instrumentation, multipole filters, precision current measurement, photodiode amplifiers, sensors, audio, etc.

AD815 is a high output current differential driver composed of two high performance amplifiers that can deliver a minimum of 500mA output current. AD815 is typically configured as a differential driver, capable of outputting a 40Vpp signal on ±15V supplies, and can be further enhanced with the use of an enhanced SOIC package.

AD8044 is a quad 150MHz rail-to-rail amplifier with low power consumption, high speed and high accuracy.

The AD7858/AD7858L are high-speed, low-power, 12-bit ADCs that operate from a single 3 V or 5 V power supply, the AD7858 being optimized for speed and the AD7858L for power.