ANALOG Manuals

The AD9522-4 is a 12 LVDS/24 CMOS output clock generator with integrated 1.6 GHz VCO.

AD8663/AD8667/AD8669 is a low noise, high precision, 16 V, CMOS, Rail-to-Rail operational amplifier from Analog Devices.

The AD8401 is a complete data acquisition and control system containing ADC, DAC, 4-channel MUX, and internal voltage reference. It offers high package density and reliability, with conversion times as short as 2us and an analog input bandwidth of 200kHz.

This document describes the features and characteristics of the AD8193 Buffered 2:1 TMDS Switch, including 2 inputs, 1 output HDMI/DVI high-speed signal switch, compatibility with HDMI 1.3 standard, support for 4 TMDS channels, data rates from 250 Mbps to 2.25 Gbps, pixel clocks from 25 MHz to 225 MHz, fully buffered unidirectional inputs/outputs, support for input cables of more than 20 meters at 1080i, more than 10 meters at 1080p, and more than 6 meters at 1080p 12-bit color, matched 50Ω input and output terminations, and single-supply operation at 3.3V. The AD8193 is suitable for applications such as advanced television (HDTV) sets, multiple input displays, projectors, A/V receivers, and set-top boxes.

This document introduces the features and characteristics of AD7865 four-channel, simultaneous sampling, fast, 14-bit ADC.

The AD7118 is a CMOS multiplying D/A converter that attenuates an analog input signal over the range of 0 to -85.5 dB in 1.5 dB steps. The analog output is determined by a six-bit attenuation code applied to the digital inputs. The device operates in the frequency range from dc to several hundred kHz. It is manufactured using an advanced monolithic silicon gate thin-film on CMOS process and is packaged in a 14-pin dual-in-line package.

The AD588 is a high precision voltage reference that features low drift (1.5 ppm/°C), low initial error (1 mV), pin programmable output (+10 V, +5 V, +65 V tracking, -5 V, -10 V), flexible output force and sense terminals, high impedance ground sense, machine insertable DIP packaging and MIL-STD-883 compliant versions.

AD5372/AD5373 is a 32-channel, 16/14-bit, serial input, voltage-output DAC. The maximum output voltage range is 4×VREF(20 V), and the output voltage range is -4 V to +8 V. Multiple independent outputs are supported. The system calibration function allows user-programmable offset and gain. Channel grouping and addressing features are supported. The Thermal Monitoring Function supports DSP/microcontroller-compatible serial interface. Digital levels comply with JEDEC standards. Power-on reset, digital reset, and clear functions are supported. DAC outputs can be updated simultaneously.

ADG811/ADG812/ADG813 are low voltage CMOS devices containing four independent SPST switches with low resistance and fast switching times.

The ADM709 is a power supply monitor that generates a system reset during power-up, power-down, and brownout conditions. When VCC falls below the reset threshold, RESET goes low and holds the µP in reset. On power-up the RESET output is held low for 140 ms after VCC rises above the thresh- old. The RESET output remains operational with VCC as low as the reset threshold.

AD9991 is a 10-bit CCD signal processor with a precision timing generator. It includes a complete analog front end with A/D conversion and a full-function programmable timing generator.

The ADP3308 is a member of the ADP330x family of precision low dropout anyCAP voltage regulators. It is pin-for-pin and functionally compatible with National’s LP2980, but offers performance advantages.