ANALOG Manuals

AD588 is a high precision, dual-tracking voltage reference developed by Analog Devices, Inc. It features low drift, low initial error, and programmable output

AD1890/AD1891 are Analog Devices' seamless transition asynchronous sample rate converters that operate in the range of 8kHz to 56kHz and support from 1:2 to 2:1 sample rate ratios.

The AMP02 is the first precision instrumentation amplifier available in an 8-lead package. Gain of the AMP02 is set by a single external resistor and can range from 1 to 10,000. No gain set resistor is required for unity gain. The AMP02 includes an input protection network that allows the inputs to be taken 60 V beyond either supply rail without damaging the device. Laser trimming reduces the input offset voltage to under 100 µV. Output offset voltage is below 4 mV, and gain accuracy is better than 0.5% for a gain of 1000. ADI’s proprietary thin-film resistor process keeps the gain temperature coefficient under 50 ppm/°C. Due to the AMP02’s design, its bandwidth remains very high over a wide range of gain. Slew rate is over 4 V/µs, making the AMP02 ideal for fast data acquisition systems.

AD1854 is an audio decoder chip from Analog Devices. It supports 16-/18-/20-/24-bit data, supports 24 bits and 96kHz sampling rate, and has a multi-bit Sigma-Delta modulator and differential output. The dynamic range is 113dB, the signal-to-noise ratio is 112dB, and the THD+N is -101dB.

The datasheet provides the functions and features of ADV7123 240MHz Triple 10-Bit High Speed Video DAC.

AD9826 is a 16-Bit 15 MSPS A/D Converter chip produced by Analog Devices. It supports 3-Channel 16-Bit Operation up to 15 MSPS and 1-Channel 16-Bit Operation up to 12.5 MSPS. It also supports Correlated Double Sampling, 1~6� Programmable Gain, �300 mV Programmable Offset, Input Clamp Circuitry, Internal Voltage Reference, Multiplexed Byte-Wide Output, Optional Single Byte Output Mode, 3-Wire Serial Digital Interface, 3 V/5 V Digital I/O Compatibility, 28-Lead SSOP Package and Low Power CMOS: 400 mW (Typ) Power-Down Mode Available.

This document introduces a small and thin ±2 g accelerometer, ADXL322. The product has a resolution of 2 mg at 60 Hz. It features a wide supply voltage range, low power consumption, good zero g bias stability, and sensitivity accuracy. The accelerometer is suitable for cost-sensitive motion and tilt sensing applications, such as smart handheld devices, mobile phones, sports and health-related devices, PC security, and PC peripherals.

This document provides a guide to ordering SSM2210 audio dual matched NPN transistors, including temperature range, package, and packaging options.

The AD8021 is an exceptionally high performance, high gain, low noise, low power, wideband amplifier that can be used in ADC preamps and drivers, instrumentation preamps, active filters, portable instrumentation, line receivers, precision instruments, ultrasound signal processing, and high gain circuits.

The ADM3202/ADM3222/ADM1385 transceivers are high speed, 2-channel RS-232/V.28 interface devices that operate from a single 3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) make them ideal for battery-powered portable instruments. The ADM3202/ADM3222/ADM1385 parts are available in PDIP, SOIC_N, SOIC_W, SSOP, and TSSOP packages.

The AD589 is a 2-terminal, low cost, temperature compensated band gap voltage reference that provides a fixed 1.23 V output voltage for input currents between 50 μA and 5.0 mA.

The AD22100 is a temperature sensor produced by Analog Devices. It features high accuracy, good linearity, wide temperature range and wide application scenarios.

AD7008 is a CMOS DDS modulator from Analog Devices, which features single +5 V supply, 32-bit phase accumulator, on-chip COSINE and SINE look-up tables, on-chip 10-bit DAC, frequency, phase and amplitude modulation, parallel and serial loading, software and hardware power down options, 20 MHz and 50 MHz speed grades.