ANALOG Manuals

AD9516-1 is a 14-output clock generator with integrated 2.5 GHz VCO, the output clock frequency range is from 1.6 GHz to 800 MHz. This device has low phase noise, programmable delay, digital or analog lock detection and other features.

AD9516-0 is a 14-output clock generator with integrated 2.8 GHz VCO

AD9515 is a clock distribution IC from Analog Devices. It has 2 programmable dividers, 1.6GHz LVPECL output and 800MHz/250MHz LVDS/CMOS output, which can achieve low jitter and low phase noise clock distribution.

AD9514 is a 1.6GHz clock distribution IC with dividers, delay adjust and three outputs. Its features include 1.6GHz differential clock input, 3 programmable dividers, divide-by in range from 1 to 32, phase select for coarse delay adjust, 2 independent 1.6GHz LVPECL clock outputs, 225 fs rms of additive broadband output jitter, 1 independent 800MHz/250MHz LVDS/CMOS clock output, 300 fs rms/290 fs rms of additive broadband output jitter, time delays up to 10ns, 4-level logic pin configuration, space-saving, 32-lead LFCSP package.

This product is an 800MHz clock distribution IC with dividers, delay adjust, and three outputs.

AD9512 is a 1.2 GHz clock distribution IC with 1.6 GHz inputs, dividers, delay adjustment and five outputs.

The document describes a 1.2 GHz Clock Distribution IC with PLL Core, Dividers, Delay Adjust, and Eight Outputs.

The AD807 is a fiber optic receiver from Analog Devices that features a quantizer and clock recovery and data retiming. It meets CCITT G.958 and Bellcore TR-NWT-000253 standards, has a 155Mbps clock recovery and data retiming function, can accept NRZ data, does not require a preamble, and uses a phase-locked loop clock recovery that does not require a crystal.

The AD808 is a fiber optic receiver with quantizer and clock recovery and data retiming functions. The product meets the CCITT G.958 standard for STM-4 regeneration, and Bellcore TR-NWT-000253 standard for OC-12. Its output jitter is 2.5 degrees RMS, supports 622 Mbps clock recovery and data retiming, accepts NRZ data, no preamble required, and uses a phase-locked loop clock recovery, no crystal required. Its quantizer sensitivity is 4 mV, and its programmable level detection range is 10 mV to 40 mV. It can operate on a single power supply with a voltage range of +5 V or -5.2 V. Its power consumption is 400 mW, and its output is compatible with 10 KH ECL/PECL. It is packaged in a 16-lead narrow 150 mil SOIC.

The product is a 622 Mbps clock and data recovery IC with integrated limiting amplifier.

The ADN2805 is a 1.25Gbps clock and data recovery IC that provides quantization and clock and data recovery functions. It automatically locks to all data rates without the need for an external reference clock or programming.

The ADN2806 is a clock and data recovery IC produced by Analog Devices. It meets SONET jitter transfer/generation/tolerance requirements, and does not require a reference clock. It has a patented clock recovery architecture, low power consumption and other features, making it very suitable for applications such as BPON ONT, SONET OC-12 WDM transponders, Regenerators/repeaters, Test equipment and Broadband cross-connects and routers.

The ADN2807 is a 155/622 Mb/s clock and data recovery IC with integrated limiting amp for SONET OC-3/-12, SDH STM-1/-4 and 15/14 FEC networks.

The ADN2811 is a clock and data recovery IC with integrated limiting amp from Analog Devices. This device has the following features: meets SONET requirements for jitter transfer/generation/tolerance; quantizer sensitivity is 4 mV typical; adjustable slice level is ±100 mV; bandwidth is 1.9 GHz; patented clock recovery architecture; loss of signal detect range is 3 mV to 15 mV; single reference clock frequency for both native SONET and 15/14 (7%) wrapper rate; choice of 19.44 MHz, 38.88 MHz, 77.76 MHz, or 155.52 MHz REFCLK LVPECL/LVDS/LVCMOS/LVTTL compatible inputs (only LVPECL/LVDS at 155.52 MHz); 19.44 MHz on-chip oscillator to be used with external crystal; loss of lock indicator; loopback mode for high speed test data; output squelch and bypass features; single-supply operation: 3.3 V; low power: 540 mW typical; 7 mm × 7 mm, 48-lead LFCSP package. This device can be used in SONET OC-48, SDH STM-16, and 15/14 applications.