ANALOG Manuals

The AD7321 is a 2-channel, software-selectable, 12-bit plus sign ADC from Analog Devices. The device features a 500 kSPS throughput rate, support for ±10 V, ±5 V, ±2.5 V and 0 V to +10 V software-selectable input ranges, as well as single-ended, true differential and pseudo differential analog input capability. Additionally, the AD7321 offers high analog input impedance, low power (17 mW), full power signal bandwidth (22 MHz), an internal 2.5 V reference, a high-speed serial interface, power-down modes, and a 14-lead TSSOP package.

The AD7988-1/AD7988-5 are 16-bit lower power PulSAR ADCs from Analog Devices. They offer 100 kSPS and 500 kSPS conversion rates, and ±0.6 LSB typical I / N and 91.5 dB typical S / N. AD7988-1/AD7988-5 use a pseudo-differential input that can be input from 0 V to VREF, with VREF ranging from 2.5 V to 5.5 V. They support 1.8 V to 5 V logic interface and provide SPI-/QSPI-/MICROWIRE™-/DSP compatible serial interface. The AD7988-1/AD7988-5 use a 10-pin MSOP and a 10-pin LFCSP package, which can meet the needs of a variety of applications.

The AD6657A is a quad 11-bit, 185 MSPS output data rate IF receiver with integrated noise shaping quantizer.

AD9253 is a Quad, 14-Bit, 80 MSPS/105 MSPS/125 MSPS Serial LVDS 1.8 V Analog-to-Digital Converter. It features 1.8 V supply operation, low power consumption, high signal-to-noise ratio, low non-linearity, etc. It is suitable for applications such as medical ultrasound, high-speed imaging, quadrature radio receivers, etc.

AD9257 is a 14-bit, 40/65 MS/s, serial LVDS, 1.8 V analog-to-digital converter produced by Analog Devices.

AD9637 is an 8-channel, 12-bit, 40/80 MSPS, serial LVDS, 1.8 V analog-to-digital converter from AD.

The AD7609 is an 8-channel differential DAS with an 18-bit, bipolar, simultaneous sampling ADC. It features 8 simultaneously sampled inputs, true differential inputs, true bipolar analog input ranges, a single 5V analog supply, and a VDRIVE ranging from 2.3V to 5.25V. The product also includes a fully integrated data acquisition solution, analog input clamp protection, an input buffer with a 1MΩ analog input impedance, a second-order antialiasing analog filter, an on-chip accurate reference and reference buffer, an 18-bit ADC with 200kSPS on all channels, and oversampling capability with a digital filter.

The AD9608 is a 10-bit, 125/105 MSPS, 1.8 V dual-channel analog-to-digital converter (ADC) that delivers low power, high dynamic range (SNR), wide bandwidth (BW), and high precision (DNL) performance.

This document describes the features and characteristics of the 12-bit, 125/105 MSPS, 1.8 V dual analog-to-digital converter AD9628.

The AD6641 is a 250 MHz bandwidth DPD observation receiver with high signal-to-noise ratio, excellent linearity, and integrated features. It uses a 12-bit parallel CMOS and 6-bit DDR LVDS interface, and supports high-speed synchronization capability. The product has low power dissipation and programmable input voltage range, among other features.

AD6643 is a dual IF receiver with 11-bit, 250 MSPS output data rate. It supports both NSR and non-NSR modes, providing high SNR and dynamic range. It is suitable for applications such as communications and diversity radio.

The AD6649 is a diversity receiver with high SNR, high SFDR, and low noise density. It features a dual-channel ADC and wideband digital processor, supporting high sample rates and IF sampling frequencies.

The AD7608 is an 8-channel data acquisition system with 18-bit, bipolar, simultaneous sampling ADC, which can be applied to power line monitoring and protection systems, multiphase motor control systems and other fields

AD7298-1 is a 10-bit high precision low power 8-channel successive approximation ADC, working voltage is 2.8V to 3.6V, conversion rate is 1MSPS, support single-ended input, internal integration 2.5V reference voltage, support SPI interface.