ANALOG Manuals

AD9626 is a 12-bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V analog-to-digital converter with excellent linearity, low power and flexibility.

This document describes the features and characteristics of the 12-bit, 80 MSPS/105 MSPS/125 MSPS/150 MSPS, 1.8 V Dual Analog-to-Digital Converter AD9627.

AD7366-5/AD7367-5 are dual-channel 12/14-bit true bipolar analog inputs SAR ADCs with a maximum sampling rate of 500 kSPS.

This document describes a high-performance 24-bit ∑-∆ ADC with a dynamic range of 115 dB and selectable oversampling rates. The product also features a flexible SPI interface, fully differential modulator input, on-chip differential amplifier, and reference buffer.

The AD7765 is a high performance, 24-bit sigma-delta (Σ-Δ) analog-to-digital converter (ADC) with 115 dB dynamic range and 156 kHz maximum output data rate. It features a fully differential modulator input, on-chip differential amplifier, on-chip reference buffer, and full band low-pass filter. The AD7765 also provides a low power mode, flexible SPI interface, overrange alert pin, digital gain correction registers, and power-down mode. It is suitable for applications such as data acquisition systems, vibration analysis, and instrumentation.

The AD7766 is a high-performance, low-power, 24-bit ADC from Analog Devices that operates at up to 128 kSPS. The device uses an oversampled successive approximation (SAR) architecture and features a 115.5 dB dynamic range, a 109.5 dB dynamic range, and a -112 dB THD. Additionally, the AD7766 has a low power consumption of 8.5 mW, 10.5 mW, and 15 mW, a 24-bit no missing code (NMC) accuracy, a 15 nV/°C zero error drift, and a 0.4 ppm/°C gain error drift.

The AD7980 is a 16-bit, 1 MSPS PulSAR ADC with features such as low power dissipation, high accuracy, and single-supply operation. It can be widely used in battery-powered equipment, communications, ATE, data acquisition, and medical instrument applications.

AD9640 is a 14-bit, 80/105/125/150 MSPS, 1.8 V dual analog-to-digital converter with low power, flexible analog input range, integrated ADC voltage reference, integrated ADC sample-and-hold inputs, high bandwidth differential analog inputs, ADC clock duty cycle stabilizer, 95 dB channel isolation/crosstalk, serial port control, user-configurable, built-in self-test (BIST) capability, energy-saving power-down modes, and integrated receive features.

This document describes the features and characteristics of the AD9869 Rev. A broadband modem mixed-signal front end, including a 12-bit DAC converter, 2×/4× interpolation filter, 200 MSPS DAC update rate, integrated 17 dBm line driver, etc.

AD7785 is a 3-channel low noise, low power, 20-bit ∑-Δ ADC with on-chip in-amp and reference from Analog Devices. It can be used for thermocouple measurements, RTD measurements, thermistor measurements, gas analysis and industrial process control.

The AD7982 is an 18-bit, 1 MSPS, low-power ADC from Analog Devices, available in MSOP and QFN packages. The AD7982 has 18-bit resolution, no missing codes, low power consumption, and is suitable for battery-powered equipment, data acquisition systems, medical instruments, and seismic data acquisition systems.

This product is a 10-bit, 200 MSPS/250 MSPS/300 MSPS, 1.8 V analog-to-digital converter with excellent linearity and low power consumption.

AD9868 is a low-cost 3.3V CMOS mixed-signal front end for broadband modems. It features a 10-bit DAC converter, 2x/4x interpolation filter, 200 MSPS DAC update rate, an integrated 17 dBm line driver with 19.5 dB gain control, a 10-bit, 80 MSPS, ADC converter, -12 dB to +48 dB low noise RxPGA (<3 nV/√Hz), a third-order programmable low-pass filter, a flexible digital data path interface, half- and full-duplex operation, pin compatibility with the AD9865, various power-down/reduction modes, an internal clock multiplier (PLL), and 2 auxiliary programmable clock outputs. It is suitable for broadband wireline networking.

AD7631 is a 18-bit, 250 kSPS, differential programmable input PulSAR® ADC with multiple input ranges, 250 kSPS throughput, 18-bit resolution with no missing codes, 102.5 dB dynamic range, 101 dB SNR, -112 dB THD, iCMOS® process, 5 V internal reference, 5 V/3.3 V interface, SPI/QSPI™/MICROWIRE™/DSP compatible, Pb-free, 48-lead LQFP and 48-lead LFCSP (7 mm × 7 mm) package, suitable for process controls, high speed data acquisition, digital signal processing and other applications.

The AD7693 is a 16-bit, ±0.5 LSB, 500 kSPS PulSAR® differential ADC in MSOP/QFN.