ANALOG Manuals

AD7791 is a low power, buffered 24-bit Sigma-Delta ADC.

AD7731 is a low-noise, high-throughput 24-bit sigma-delta ADC with a proprietary programmable gain front end that allows it to directly accept a range of input signal ranges, including low-level signals, from a transducer. The part features three buffered differential programmable gain analog inputs that can be directly connected to analog sensors.

The AD8132 is a low cost differential or single-ended input to differential output amplifier with a high speed of 350 MHz and a slew rate of 1200 V/μs. It features internal common-mode feedback, improved gain and phase balance, and is suitable for low power differential ADC drivers, differential gain and differential filtering, video line drivers, and single-ended input to differential output drivers, active transformers.

ADG3308/ADG3308-1/ADG3308-2 are bidirectional level translators containing eight bidirectional channels. They can be used in multivoltage digital system applications. Features include bidirectional logic level translation, operating voltage range from 1.15 V to 5.5 V, quiescent current less than 1 μA, no direction pin.

The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230's high CMR (110 dB) rejects line noise in measurements

The AD7715 is a 16-bit Sigma-Delta ADC from Analog Devices that consumes less than 450µA of supply current at 3V and has a conversion speed of 1µs. The AD7715 is manufactured using CMOS technology and has very low power consumption, with a standby power consumption of only 50µW at 3V. The AD7715 provides four gain selections of 1, 2, 32, and 128 and supports a three-wire serial interface that is compatible with SPI™, QSPI™, MICROWIRE™, and DSP.

The document describes the features and characteristics of the AD7952, a 14-bit, 1 MSPS, differential, programmable input PulSAR® ADC. The ADC offers multiple programmable input ranges through pins or a serial SPI®-compatible interface. It has a throughput of 1 MSPS (warp mode) and a resolution of 14 bits with no missing codes. It features low INL, high SNR, and utilizes the iCMOS® process technology. The ADC includes a 5V internal reference with low drift, a temperature output, and has no pipeline delay due to its SAR architecture. It supports both parallel and serial interfaces and has low power dissipation. The AD7952 is suitable for applications such as process controls, medical instruments, and high-speed data acquisition.

The document introduces the Analog Devices Mixed-Signal Front-End (MxFE™) Baseband Transceiver for Broadband Applications AD9861 Rev. 0. The product includes dual 10-bit analog-to-digital converters and dual 10-bit digital-to-analog converters with internal or external reference, with versions available at 50 MSPS and 80 MSPS. The product also features programmable gain control and a configurable internal clock distribution block. Various data transfer modes can be achieved through register programmability or limited programmability through mode pins. Independent power-down control pins are provided for Rx and Tx.

This document describes the features and characteristics of the 18-bit, 1.25 MSPS PulSAR® ADC AD7643, including input range, resolution, dynamic range, signal-to-noise ratio, total harmonic distortion, etc.

AD766 is a 16-bit DSP DACPORT that provides a direct, three-wire interface to the serial ports of popular DSP processors, including the ADSP-2101, TMS320CXX, and DSP56001.

This document introduces the ADT7466 dBCool controller, a complete thermal monitor and dual fan controller for noise-sensitive notebook PCs.

AD797 is a low noise, low distortion operational amplifier from Analog Devices

AD7923 is a high-precision, high-speed, low-power, 4-channel, successive approximation ADC that operates from a single 2.7 V to 5.25 V power supply and supports serial interfaces (SPI™/QSPI™/MICROWIRE™/DSP).

ADSP-BF535 is a high-performance Blackfin embedded processor launched by Analog Devices. The core frequency is 350MHz, and it has two 16-bit MACs, two 40-bit ALUs, one 40-bit shifter, four 8-bit video ALUs, and two 40-bit accumulators.

The AD8278 is a low power, wide supply range, low cost difference amplifier with a gain of 1/2. Its features include a wide input range, rugged input overvoltage protection, low supply current and low power dissipation.