TEXAS Manuals (Industrial)

The ADS1601 is a high-performance, high-precision, high-speed, low-power analog-to-digital converter (ADC). ADS1601 is used for sonar, vibration analysis and data acquisition.

File format: PDF Size:388 KB

File format: PDF Size:796 KB

tps64200 is a member of the tps6420x family of nonsynchronous step-down controllers that are ideally suited for systems powered from a 5-v or 3.3-v bus or for applications powered from a 1-cell li-ion battery or from a 2- to 4-cell nicd, nimh, or alkaline battery.

File format: PDF Size:324 KB

File format: PDF Size:0 KB

This document describes the features and applications of the ADS8327 and ADS8328, low power, 16-bit, 500kHz, single/dual unipolar input analog-to-digital converters with a serial interface.

File format: PDF Size:1733 KB

The TUSB3200 is a USB Streaming Controller (STC) data manual from Texas Instruments.

File format: PDF Size:351 KB

This document describes the features and characteristics of TLV320AIC20, TLV320AIC21, TLV320AIC24, TLV320AIC25, TLV320AIC20K, and TLV320AIC24K products. These products are low-power, highly-integrated, programmable 16-bit, 26KSPS, dual-channel CODECs. They support differential and single-ended analog input/output, stereo 16-bit oversampling sigma-delta A/D converter, and built-in analog functions such as stereo 16-bit oversampling sigma-delta D/A converter, analog and digital sidetone converter, anti-aliasing filter (AAF), programmable input and output gain (PGA), microphone/handset/headset amplifiers, etc. These products also feature selectable FIR/IIR filter, programmable sampling rate, and on-chip FIR, providing 84dB SNR for ADC and 92dB SNR for DAC over 13kHz bandwidth. They are fully compatible with common TMS320® DSP and microcontroller, and support smart time division multiplexed (SMARTDM®) serial port and internally generated master/slave device addresses.

File format: PDF Size:1159 KB

The PCM3501 is a 16-bit audio codec from Burr-Brown Corporation. It supports sampling frequencies from 7.2 kHz to 26 kHz.

File format: PDF Size:190 KB

This user's guide provides a reference document for the SRC4382EVM-PDK and SRC4392EVM-PDK product development kits. The kits include either an SRC4382EVM or an SRC4392EVM daughterboard, as well as a DAIMB motherboard. Together, the daughter and mother boards form a modular platform for evaluating the function and performance of the Texas Instruments' SRC4382 and SRC4392 integrated circuits. Applications software is provided with the PDK for writing and reading registers and data buffers integral to the SRC4382 and SRC4392 devices. The software communicates with the device under test using the USB slave interface on the DAIMB board. The software requires a host PC running the Microsoft Windows™ 2000 or XP operating system.

File format: PDF Size:3532 KB

The TLV320AIC3105 is a low-power stereo audio codec for portable audio/telephony applications. It features multiple single-ended inputs and a stereo headphone amplifier. The output stages can be programmed in single-ended or fully differential configurations. Extensive register-based power control is included, enabling stereo 48-kHz DAC playback as low as 14 mW from a 3.3-V analog supply. The record path of the TLV320AIC3105 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that may occur.

File format: PDF Size:1368 KB

2000 Mixed Signal Products Data Manual is a document that provides information about the specifications of TI's semiconductor products.

File format: PDF Size:376 KB

The TLV320AIC32 is a low-power stereo-audio codec with a stereo headphone amplifier, as well as multiple inputs and outputs, programmable in single-ended or fully-differential configurations.

File format: PDF Size:1307 KB

The PCM3000/3001 is a low-cost, single-chip stereo audio codec with single-ended analog voltage input and output. Both ADCs and DACs employ delta-sigma modulation with 64-times oversampling. The codec is suitable for various audio applications including recording devices, karaoke systems, and car stereos.

File format: PDF Size:454 KB

PCM3010 is a low-cost single-chip 24-, 16-bit stereo audio codec (ADC and DAC) with single-ended analog voltage input and output.

File format: PDF Size:477 KB

Describes the features and characteristics of AD5793

File format: PDF Size:664 KB

This is a low-power, high-quality audio codec that supports stereo audio DAC and mono audio ADC, supports up to 48 ksps rates. The audio codec has a sound quality of up to 97-dBA, low power consumption of only 11-mW, supports stereo audio playback. The audio codec also features a 325-mW, 8-Ω speaker driver, stereo headphone amplifier and capless output option, microphone preamp and hardware automatic gain control, integrated PLL, supports flexible audio clock generation, programmable digital audio bass/treble/EQ/De-Emphasis, direct battery measurement, accepts up to 6-V input, integrated temperature measurement, SPI and I2S serial interface, full power-down control, 32-Pin 5 x 5 mm QFN package.

File format: PDF Size:1016 KB

The SRC4192 and SRC4193 are asynchronous sample rate converters designed for professional and broadcast audio applications. The SRC4192 and SRC4193 combine a wide input-to-output sampling ratio with outstanding dynamic range and ultra low distortion. Input and output serial ports support standard audio formats, as well as a Time Division Multi- plexed (TDM) mode. Flexible audio interfaces allow the SRC4192 and SRC4193 to connect to a wide range of audio data converters, digital audio receivers and transmitters, and digital signal processors. The SRC4192 is a standalone pin programmed device, with control pins for mode, data format, mute, bypass, and low group delay functions. The SRC4193 is a software-controlled device featuring a serial peripheral interface (SPI) port, which is utilized to program all functions via internal control registers. The SRC4192 and SRC4193 may be operated from a single +3.3V power supply. A separate digital I/O supply (VIO) operates over the +1.65V to +3.6V supply range, allowing greater flexibility when interfacing to current and future gen- eration signal processors and logic devices. Both the SRC4192 and SRC4193 are available in a 28-lead SSOP package.

File format: PDF Size:1223 KB

This is a user guide for using TI products

File format: PDF Size:1103 KB

This document provides the data sheet for Harris Semiconductor's CD54/74AC373, CD54/74ACT373, and CD54ACT533 products. The document also mentions that Texas Instruments and its subsidiaries reserve the right to make changes to their products or discontinue them without notice, and advises customers to obtain the latest version of relevant information to ensure the accuracy and completeness of the information relied upon before placing orders.

File format: PDF Size:242 KB

This document is about the packaging information of products JM38510/30109B2A, JM38510/30109BEA, JM38510/30109BFA, JM38510/30109SEA, JM38510/30109SFA, SN54LS109AJ, SN74109N, SN74LS109AD, SN74LS109ADE4, SN74LS109ADG4, SN74LS109ADR

File format: PDF Size:536 KB