TEXAS Manuals (Industrial)

This file is the application guide for TPS2398/TPS2399, introducing the main features and application scenarios of the product

File format: PDF Size:383 KB

The TPS2223A, TPS2224A, and TPS2226A CardBus™ power-interface switches provide an integrated power-management solution for two PC Card sockets. The TPS2220A is a single-slot option for this family of devices. These devices allow the controlled distribution of 3.3 V, 5 V, and 12 V to each card slot. The current-limiting and thermal-protection features eliminate the possibility of card failure due to overcurrent or overheating.

File format: PDF Size:414 KB

This document is the datasheet of the TMS320C80 digital signal processor from 1997, which describes the features and characteristics of the processor. The processor is a single-chip parallel multiple instruction/multiple data (MIMD) DSP capable of executing over two billion RISC-equivalent operations per second. It includes a master processor (MP), four parallel processors (PP), a transfer controller (TC), and a video controller (VC) among other components. It features a 32-bit RISC processor, IEEE-754 floating-point capability, instruction cache, data cache, and more. It also supports big-endian or little-endian operation, has 50K bytes of on-chip RAM, a 4G-byte address space, a 16.6-ns cycle time, and operates at 3.3V.

File format: PDF Size:3097 KB

TLV2352 consists of two independent, low-power comparators specifically designed for single power-supply applications and operates with power-supply rails as low as 2V. When powered from a 3V supply, the typical supply current is only 120µA. TLV2352 is designed using the Texas Instruments LinCMOS technology and therefore features an extremely high input impedance (typically greater than 1012Ω), which allows direct interfacing with high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup resistor to provide a positive output voltage swing, and they can be connected to achieve positive-logic wired-AND relationships.

File format: PDF Size:306 KB

TLC2652, TLC2652A, TLC2652Y Advanced LinCMOS PRECISION CHOPPER-STABILIZED OPERATIONAL AMPLIFIERS

File format: PDF Size:441 KB

tl322c, tl322i low-power operational amplifiers datasheet

File format: PDF Size:92 KB

The THS4211 is a low distortion, high speed, voltage feedback amplifier from TI that features unity gain stability, wide bandwidth (1GHz), high slew rate (970 V/μs), low distortion (-90 dBc THD @ 30 MHz) and high output drive (IO = 200 mA).

File format: PDF Size:1522 KB

THS4011/12 290-MHz Low Distortion High-Speed Amplifiers are ideal high performance single/dual channel voltage feedback amplifiers for a wide range of applications.

File format: PDF Size:444 KB

SN54AHCT32, SN74AHCT32 are quad 2-input positive-OR gates from Texas Instruments. They have TTL-voltage compatibility, 250mA latch-up performance, and 2000V Human-Body Model (A114-A) and 200V Machine Model (A115-A) ESD protection.

File format: PDF Size:599 KB

SN74CBT3257 is a 4-bit 1-of-2 high-speed TTL-compatible FET multiplexer/demultiplexer.

File format: PDF Size:355 KB

File format: PDF Size:0 KB

This document describes a single buffer/driver that is optimized for 1.8V operation and supports mixed-mode signal operation. It features low power consumption, fast transfer speed, and high noise immunity.

File format: PDF Size:296 KB

SN54ALS09 and SN74ALS09 are quadruple 2-input positive-AND gates with open-collector outputs. They can be used to perform the Boolean functions Y = A • B or Y = A + B in positive logic. The open-collector outputs require pullup resistors to perform correctly. These outputs may be connected to other open-collector outputs to implement active-low wired-OR or active-high wired-AND functions. Open-collector devices are often used to generate higher VOH levels. The SN54ALS09 is characterized for operation over the full military temperature range of –55°C to 125°C. The SN74ALS09 is characterized for operation from 0°C to 70°C.

File format: PDF Size:63 KB

The document describes the features and characteristics of triple 3-input positive-NAND gates of SN5410, SN54LS10, SN54S10, SN7410, SN74LS10, SN74S10.

File format: PDF Size:579 KB

SCPU005 is the user manual published by Texas Instruments, which introduces the product characteristics of 2000 PCI Bus Solutions.

File format: PDF Size:166 KB

This datasheet introduces the features and characteristics of SN54ALS841/SN54AS841/SN54ALS842/SN54AS842/SN74ALS841/SN74AS841/SN74ALS842/SN74AS842 10-bit bus interface D-type latches.

File format: PDF Size:125 KB

SN54AHC139 and SN74AHC139 are dual 2-line to 4-line decoders/demultiplexers designed for 2V to 5.5V VCC operation. They are designed for high-speed memory decoding or data transmission systems and incorporate two enable inputs to simplify cascading and/or data reception. They have latch-up performance exceeding 250mA per JESD 17 and ESD protection exceeding JESD 22.

File format: PDF Size:480 KB

SN54ABT16843 / SN74ABT16843 18-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS is a product of Texas Instruments company, belonging to the Widebus series. The product uses EPIC-IIB BiCMOS design, which is high performance, low power consumption, and can be used to drive high capacitance or low impedance loads.

File format: PDF Size:120 KB

File format: PDF Size:0 KB

TI TMS340SDK-PC Software Development Kit (SDK) is an integrated development environment (IDE) for programming and compiling TI TMS340 series 340 series DSPs. TMS340SDK-PC supports Windows, Linux, and Mac OS.

File format: PDF Size:1434 KB