TEXAS Manuals (Industrial)

The THS1040 is a low power 10-bit 40MSPS analog-to-digital converter (ADC) that operates from a single 3-V supply. The THS1040 can be single-ended or differential input, and provides a wide selection of voltage references to match the user's design requirements. The internal reference can be bypassed to use an external reference to suit the dc accuracy and temperature drift requirements of the application.

File format: PDF Size:530 KB

THS1031 is a CMOS, low power, 10-bit, 30 MSPS analog-to-digital converter (ADC) that can operate with a supply range from 2.7 V to 3.3 V. The THS1031 has been designed to give circuit developers more flexibility. The analog input to the THS1031 can be either single-ended or differential. This device has a built-in clamp amplifier whose clamp input level can be selected from an external dc source or from an internal high-precision 10-bit digital clamp level programmable via an internal CLAMP register. A 3-bit PGA is included to maintain SNR for small signal. The THS1031 provides a wide selection of voltage reference to match the user’s design requirements. For more design flexibility, the internal reference can be bypassed to use an external reference to suit the dc accuracy and temperature drift requirements of the application. The out-of-range indicator is also available.

File format: PDF Size:358 KB

The THS1030 is a CMOS, low power, 10-bit, 30 MSPS analog-to-digital converter (ADC) that can operate with a supply range from 2.7 V to 3.3 V. It provides a wide selection of voltage references to match the user's design requirements.

File format: PDF Size:302 KB

THS10082 is a low-power 10-bit 8MSPS analog-to-digital converter (ADC) suitable for radar, imaging, high-speed acquisition, and communications applications. Its features are speed, resolution, bandwidth, and single-supply operation. The device uses a multi-stage pipelined architecture with output error correction logic to prevent code loss over the entire operating temperature range. Internal control registers allow for programming the ADC into the desired mode. The THS10082 consists of two analog inputs, which can be individually selected and configured for single-ended or differential inputs. An integrated 16-word deep FIFO allows data to be stored to relieve the processor burden.

File format: PDF Size:318 KB

The THS1009 is a CMOS, low-power, 10-bit, 8 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers allow for programming the ADC into the desired mode. The THS1009 consists of two analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. Internal reference voltages for the ADC are 1.5V and 3.5V.

File format: PDF Size:276 KB

The THS1007 is a CMOS, low-power, 10-bit, 6 MSPS analog-to-digital converter (ADC) suitable for applications in radar, imaging, high-speed acquisition, and communications.

File format: PDF Size:304 KB

The THS1007 is a low-power, 10-bit, 6 MSPS analog-to-digital converter (ADC) that is suited for applications in radar, imaging, high-speed acquisition, and communications. It features a multistage pipelined architecture with output error correction logic that provides for no missing codes over the full operating temperature range. Internal control registers are used to program the ADC into the desired mode. The THS1007 consists of four analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. Internal reference voltages for the ADC (1.5 V and 3.5 V)

File format: PDF Size:304 KB

This user’s guide serves as a reference book for the THS1206/THS12082/THS10064/THS10082 evaluation module. It describes the operation and usage of the 12-bit THS1206/THS12082 and 10-bit THS10064/THS10082 analog-to-digital converter (ADC) evaluation modules.

File format: PDF Size:663 KB

The THS10064 is a 10-bit 6 MSPS single-chip ADC, using low-power CMOS technology, with a 16-word FIFO buffer, working voltage 3V or 5V, and is mainly used in radar, communication, control, high-bandwidth DSP front-end and other fields

File format: PDF Size:544 KB

This guide describes data conversion features of Texas Instruments' AAP products.

File format: PDF Size:506 KB

The THS0842 is a dual-input, 8-bit, 40 MSPS low-power analog-to-digital converter with single or dual parallel bus output. It features dual simultaneous sample and hold inputs, differential or single-ended analog inputs, 8-bit resolution 40 MSPS sampling analog-to-digital converter, and single or dual parallel bus output.

File format: PDF Size:479 KB

The TLC7528C, TLC7528E, and TLC7528I are three 8-bit dual-channel multiplying digital-to-analog converters from Texas Instruments, with high precision and high reliability, supporting 15V power supply.

File format: PDF Size:246 KB

The TLC27M2, TLC27M2A, TLC27M2B, TLC27M7 LinCMOS PRECISION DUAL OPERATIONAL AMPLIFIERS is a low noise, low power, single supply operation operational amplifier. It features a wide range of supply voltages, large output voltage range, small input offset voltage, low input impedance, designed-in latch-up immunity and ESD protection circuitry.

File format: PDF Size:512 KB

The TL3116 is an ultra-fast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ±5-V supplies. The input common-mode voltage extends to the negative rail for ground sensing applications. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal.

File format: PDF Size:196 KB

TL05x, TL05xA, TL05xY ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS is a low offset operational amplifier released by TI. This series of products has improved DC accuracy and faster conversion rate, while the power consumption is also lower. It can be used to upgrade existing circuits or to obtain the best performance in new designs.

File format: PDF Size:1023 KB

TIBPAL22VP10-20C/25M is a high-performance programmable array logic circuit produced by TI. It is functionally equivalent to TIBPAL22V10/10A, but adds feedback paths in the output logic macrocell. It offers a choice of 20 ns or 25 ns maximum operating speed. All outputs can be user programmable for registered or combinational operation, polarity, and output enable control. TTL level preload is provided for improved testability.

File format: PDF Size:216 KB

This document is about TIBPAL16L8-10C, TIBPAL16R4-10C, TIBPAL16R6-10C, TIBPAL16R8-10C TIBPAL16L8-12M, TIBPAL16R4-12M, TIBPAL16R6-12M, TIBPAL16R8-12M HIGH-PERFORMANCE IMPACT-X  PAL CIRCUITS products' production data. It contains information about the products' features and characteristics, such as high performance, functionality, and product models and brands.

File format: PDF Size:208 KB

The THS4041/2 165MHz C-Stable High-Speed Amplifiers are single/dual, high-speed voltage feedback amplifiers capable of driving any capacitive load.

File format: PDF Size:471 KB

SN75C198 is a quadruple low-power line driver that meets the specifications of ANSI EIA/TIA-232-E and ITU Recommendation V.28. It has very low supply current and ultra-low supply current, and is an improved functional replacement for SN75188, Motorola MC1488, National Semiconductor DS14C88, and DS1488. It has CMOS- and TTL-compatible data inputs, with a controlled-output slew rate of 30 V/µs and an output current limit of 10 mA. It is characterized for operation from 0°C to 70°C.

File format: PDF Size:208 KB

The SN74V3640, SN74V3650, SN74V3660, SN74V3670, SN74V3680, and SN74V3690 are 3.3-V CMOS FIFOs with selectable depth and bandwidth to meet the needs of a variety of applications. These devices feature low power and high performance, making them ideal for communication, consumer electronics, and computing applications.

File format: PDF Size:721 KB