TEXAS Manuals (Industrial)

The PT7615 is a 20-A low-voltage programmable integrated switching regulator from Texas Instruments (TI). It features a 5V input and an output voltage range of 1.075V to 1.85V in 25mV steps. It is VRM 9.0 compliant.

File format: PDF Size:155 KB

The PT6980 series is a dual output integrated switching regulator (ISR) designed specifically to power mixed signal ICs. Operating from a 12-V input bus, the dual output provides power for both the digital I/O logic and a DSP core from a single module. Both output voltages are internally sequenced during power-up and power-down to comply with the requirements of the latest DSP chips. Each output is inde- pendently adjustable or can be set to at least one alternative bus voltage with a simple pin-strap. The modules are made available in a space-saving solderable case. The features include output current limit and short-circuit protection.

File format: PDF Size:285 KB

The PT5100 modules are a series of economical, easy-to-use 1-A positive step-down, Integrated Switching Regulators (ISRs). These ISRs are compatible with most TO-220 style linear regulators, and when employed as a linear replacement, provide significant benefits in both efficiency and power dissipation. They are recommended for use in a wide variety of on-board power regulation applications. These include computer, data storage, industrial controls, and battery powered equipment. Modules are laser-trimmed for optimal output voltage accuracy, and exhibit excellent line and load regulation. The PT5100 also features output current limiting and thermal shutdown protection.

File format: PDF Size:165 KB

TPS735xx low-dropout linear regulators provide 500mA output current with low quiescent current, ultra-low noise and high PSRR

File format: PDF Size:730 KB

The document describes the features and characteristics of the TPS40056, including the operating input voltage range, output voltage tracking, programmable fixed-frequency voltage mode controller, etc.

File format: PDF Size:770 KB

The TPIC5203 is a high voltage switch transistor produced by Texas Instruments. It has a maximum output voltage of 60V and a maximum output current of 8A.

File format: PDF Size:205 KB

SN54BCT244, SN74BCT244 are octal buffers/drivers with 3-state outputs, designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

File format: PDF Size:74 KB

This document is the datasheet of CDCR83 DIRECT RAMBUS CLOCK GENERATOR product released by Texas Instruments (TI). It describes the features and characteristics of the product in detail.

File format: PDF Size:171 KB

This document describes the features of Harris Semiconductor SCHS122I, including wide analog input voltage range, low on resistance, low crosstalk, fast switching and propagation speeds, wide operating temperature range, etc.

File format: PDF Size:460 KB

The CD74HC377 is an octal D-type flip-flops with a buffered clock (CP) common to all eight flip-flops. All the flip- flops are loaded simultaneously on the positive edge of the clock (CP) when the Data Enable (E) is Low.

File format: PDF Size:304 KB

The document describes the features and characteristics of Harris Semiconductor SCHS146F, including data output selection, I/O port or memory selector, enable inputs, etc. The product has low power consumption, high speed, and high noise immunity.

File format: PDF Size:375 KB

The CD4071B, CD4072B, and CD4075B types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PW and PWR suffixes).

File format: PDF Size:518 KB

The LPV321/358/324 devices are the most cost-effective solutions for applications where low voltage, low-power operation, space saving, and low price are needed.

File format: PDF Size:423 KB

The document introduces the features of the TI MSP430 series ultra-low-power microcontrollers, including supply voltage range, power consumption, clock module configuration, timer A, comparator, programming method, etc.

File format: PDF Size:546 KB

This document is the TL780 series positive voltage regulator manual, which introduces the features and characteristics of the series products, including ±1% output tolerance, ±2% output tolerance, thermal shutdown, internal short circuit current limiting, pinout identical to µA7800 series, improved version of µA7800 series

File format: PDF Size:133 KB

The datasheet introduces the features and characteristics of the TL750L and TL751L series low-dropout voltage regulators. The series regulators have options of 5V, 8V, 10V, and 12V, and the TL751L series also has an enable (ENABLE) input. When ENABLE is high, the regulator output is in the high-impedance state. This gives the designer complete control over power up, power down, or emergency shutdown. The TL750L and TL751L series are low-dropout positive-voltage regulators specifically designed for low-power applications.

File format: PDF Size:352 KB

This document describes the features and characteristics of the µA78M00 series positive-voltage regulators, including high output current up to 500mA, no external components required, internal thermal-overload protection, and short-circuit current limiting.

File format: PDF Size:265 KB

The TPS755xx family of 5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 5 A of output current with a dropout of 250 mV (TPS75533). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 µA at full load and drops down to less than 1 µA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes.

File format: PDF Size:487 KB

The TPS5102 is a dual, high efficiency controller designed for notebook system power requirements. Under light load conditions, high efficiency is maintained as the controller switches from the PWM mode to the lower frequency Skip mode. These two operating modes, along with the synchronous-rectifier drivers, dead-time, and very low quiescent current, allow power to be conserved and the battery life extended, under all load conditions. The resistor-less current protection and fixed high-side driver voltage simplify the system design and reduce the external parts count. The wide input voltage range and adjustable output voltages allow flexibility for using the TPS5102 in notebook power supply applications.

File format: PDF Size:988 KB

The TLV2354, TLV2354Y is a four-channel differential comparator designed by Texas Instruments with low supply voltage, low power consumption, high input impedance and fast response time, suitable for single-supply applications

File format: PDF Size:302 KB