TEXAS Manuals (Industrial)

The SN54ABT16952 and SN74ABT16952 are 16-bit registered transceivers with 3-state outputs. They feature state-of-the-art EPIC-ΙΙB BiCMOS design that significantly reduces power dissipation. The latch-up performance exceeds 500mA per JEDEC Standard JESD-17. The typical VOLP (Output Ground Bounce) is less than 1V at VCC = 5V, TA = 25°C. The distributed VCC and GND pin configuration minimizes high-speed switching noise. The flow-through architecture optimizes PCB layout. The outputs have high-drive capability (-32mA IOH, 64mA IOL). Package options include plastic 300-mil shrink small-outline (DL) and thin shrink small-outline (DGG) packages, as well as a 380-mil fine-pitch ceramic flat (WD) package with 25-mil center-to-center spacings.

File format: PDF Size:150 KB

SN54ABT16657 and SN74ABT16657 are 16-bit transceivers with parity generators/checkers and 3-state outputs. They feature state-of-the-art EPIC-ΙΙB BiCMOS design that significantly reduces power dissipation and exceeds JEDEC standard JESD-17 latch-up performance. The products have distributed VCC and GND pin configuration to minimize high-speed switching noise. They utilize a flow-through architecture for optimized PCB layout. The high-drive outputs (–32-mA IOH, 64-mA IOL) provide strong output capabilities. Package options include plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) packages, as well as 380-mil Fine-Pitch Ceramic Flat (WD) package with 25-mil center-to-center spacings.

File format: PDF Size:162 KB

16-bit bus transceivers and registers with 3-state outputs

File format: PDF Size:235 KB

This data sheet provides detailed information about SN54ABT16543, SN74ABT16543 16-bit registered transceivers.

File format: PDF Size:202 KB

SN54ABT16541 and SN74ABT16541A are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals.

File format: PDF Size:150 KB

SN54ABT16374A, SN74ABT16374A are 16-bit edge-triggered D-type bidirectional flip-flops with 3-state outputs specifically designed for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.

File format: PDF Size:173 KB

SN54ABT16373A, SN74ABT16373A are 16-bit transparent D-type latches with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a n

File format: PDF Size:173 KB

ABT162827A is a 20-bit non-inverting buffer from TI with independent output enable signals. The output ports have equivalent 25-ohm series resistors, so no external resistors are required. During power on and off, it is in the high impedance state. The typical VOLP (output ground bounce) is less than 1V at VCC=5V, TA=25°C. Distributed VCC and GND pins minimize high-speed switching noise. Ioff and power-up 3-state support hot insertion. The flow-through architecture optimizes PCB layout. Latch-up performance exceeds 500 mA per JEDEC Standard JESD-17. ESD protection exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A)

File format: PDF Size:194 KB

SN54ABT16244 and SN74ABT16244A are 16-bit buffers and line drivers specifically designed to improve the performance and density of 3-state memory address drivers, closed-loop control logic, and other high-speed applications.

File format: PDF Size:177 KB

The SCBS239F is a 16-bit noninverting 3-state transceiver designed for synchronous two-way communication between data buses. It features no external resistors required, low output ground bounce, distributed VCC and GND pins, and support for partial-power-down mode operation.

File format: PDF Size:182 KB

The THS3201 is a wide-band, high-speed current-feedback amplifier, designed to operate over a wide supply range of ±3.3 V to ±7.5 V for todays high performance applications. It features a unity gain bandwidth of 1.8 GHz, a high slew rate of 10500 V/µs, and low distortion performance, making it ideal for arbitrary waveform driver applications and driving high-resolution, high-sampling rate ADCs. Additionally, the THS3201 is well-suited for broadcast video and HDTV applications.

File format: PDF Size:740 KB

This datasheet provides characteristics, specifications and application information for the THS3110 and THS3111 low-noise, high-voltage, current-feedback operational amplifiers. The THS3110 and THS3111 are low-noise, high-voltage, current-feedback amplifiers designed for operation over a wide supply range of ±5 V to ±15 V for today's high performance applications.

File format: PDF Size:877 KB

This document is about the THS3112/5 datasheet, introducing the features of the THS3112/5 product, including low noise, high speed, large output current, high speed, low distortion and other features.

File format: PDF Size:372 KB

The THS3120 and THS3121 are low-noise, high-voltage, high output current drive, current-feedback amplifiers designed to operate over a wide supply range of ±5 V to ±15 V for today's high performance applications.

File format: PDF Size:859 KB

THS3122/5 is a low noise, high speed, high output current driver that can drive heavy loads with low distortion over a wide frequency range.

File format: PDF Size:659 KB

This document introduces TI's THS3122/5 series of low-noise, high-speed current feedback amplifiers, which have high output current drive capabilities and are ideal for applications requiring low distortion over a wide frequency range with heavy loads.

File format: PDF Size:659 KB

This PDF file introduces TI's THS3091/5 high-voltage, low-distortion, current-feedback operational amplifiers. The product has low distortion, low noise, high speed, high output current drive and other characteristics. It is suitable for applications that require large linear output signals, such as Pin, Power FET, and VDSL line drivers.

File format: PDF Size:1017 KB

File format: PDF Size:0 KB

The THS3061 (single) and THS3062 (dual) are high-voltage, high slew-rate current feedback amplifiers utilizing Texas Instruments BICOM-1 process. Designed for low-distortion with a high slew rate of 7000 V/µs, the THS306x amplifiers are ideally suited for applications requiring large, linear output signals such as video line drivers and VDSL line drivers. The THS3061 and THS3062 provide well-regulated ac performance characteristics with power supplies ranging from ±5-V operation up to ±15-V supplies. Most notable, the 0.1-dB flat bandwidth is exceedingly high, reaching beyond 100 MHz, and the THS306x has less than 0.3 dB of peaking in the frequency response when configured in unity gain. The unity gain bandwidth of 300 MHz allows for excellent distortion characteristics at 10 MHz. The flexibility of the current feedback design allows for a 220-MHz, –3-dB bandwidth in a gain of 10 indicating excellent performance even at high gains. The THS306x consumes 8.3-mA per channel quiescent current.

File format: PDF Size:249 KB

This datasheet introduces Texas Instruments' THS3061 and THS3062 high-voltage, high slew-rate current feedback amplifiers, which use the Texas Instruments BICOM-1 process. Designed for low distortion and a high slew rate of 7000 V/µs, the THS306x amplifiers are ideally suited for applications requiring large, linear output signals such as video line drivers and VDSL line drivers.

File format: PDF Size:249 KB