intersil Manuals (Industrial)

ISL65426MREP is a high efficiency dual output monolithic synchronous buck converter operating over an input voltage range of 2.5V to 5.5V. This single chip power solution provides two output voltages which are selectable or externally adjustable from 1.2V to 80% of the supply voltage while delivering up to 6.0A of total combined output current when used at TJ of +125°C or less. The two PWMs are synchronized 180° out of phase reducing the RMS input current and ripple voltage. The ISL65426MREP switches at a fixed frequency of 1MHz and utilizes current-mode control with integrated compensation to minimize the size and number of external components. The internal synchronous power switches are optimized for good thermal performance, high efficiency, and eliminate the need for an external Schottky diode. A unique power block architecture allows partitioning to support one of four configuration options. One master power block is associated with each synchronous converter channel. Four floating slave power blocks allow the user to assign them to either channel. Proper external configuration of the power blocks is verified internally prior to soft-start initialization. Independent enable inputs allow for synchronization or sequencing soft-start intervals of the two converter channels. A third enable input allows additional sequencing for multi-input bias supply designs. Individual p

File format: PDF Size:66 KB

The ISL6420BMAEP is an advanced single synchronous buck pulse-width modulation (PWM) controller from ISL company. It integrates control, output adjustment, monitoring and protection functions into a single package. This controller provides simple, single feedback loop, voltage mode control with fast transient response. The output voltage of the converter can be precisely regulated to as low as 0.6V, with a maximum tolerance of ±2.0% over temperature and line voltage variations. The operating frequency is fully adjustable from 100kHz to 1.4MHz. High frequency operation offers cost and space savings.

File format: PDF Size:62 KB

The ISL22346WMVEP integrates four digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit.

File format: PDF Size:101 KB

The ISL22326WMVEP is a dual digitally controlled potentiometer with features like low noise, low power, I2C bus, and 128 taps. It integrates two digitally controlled potentiometers and non-volatile memory, making it suitable for various applications including control, parameter adjustments, and signal processing.

File format: PDF Size:102 KB

The ISL22316WMUEP is a digitally controlled potentiometer from Intersil with low noise, low power and I2C bus interface. It can be used in a wide variety of applications including control, parameter adjustments and signal processing.

File format: PDF Size:104 KB

HM-6642/883 512 x 8 CMOS PROM is a 512 x 8 CMOS NiCr fusible link Programmable Read Only Memory produced by Intersil, which has synchronous circuit design techniques and CMOS processing techniques, and has high speed performance and very low power consumption.

File format: PDF Size:331 KB

The HM-6617/883 2K x 8 CMOS PROM is a low power synchronous design, using Intersil's advanced self-aligned silicon gate CMOS process technology, offering ultra-low standby current.

File format: PDF Size:152 KB

This document describes a CMOS 8192 x 8-bit Static Random Access Memory with features such as low standby supply current, fast address access time, and low data retention supply voltage. It is suitable for microprocessor-based systems and is easy to interface with Intersil 80C86 and 80C88 microprocessors.

File format: PDF Size:248 KB

80C286/883 is an Intersil high-performance microprocessor with built-in memory protection that supports operating system and task isolation as well as program and data privacy within tasks.

File format: PDF Size:502 KB

5962-0721301QXC, 5962-0721302QXC, 5962-0721303QYC 500MHz rail-to-rail amplifiers

File format: PDF Size:127 KB

The 5962-0721201QXC is a video distribution amplifier designed by Intersil. It features a high drive capability of 450mA and a wide operating voltage range of 5V to 12V. It also has a low power consumption of only 13mA.

File format: PDF Size:222 KB

5962-0625601QXC, 5962-0625602QXC 1.4GHz Current Feedback Amplifiers with Enable

File format: PDF Size:111 KB

File format: PDF Size:0 KB

The 5962-0623601QPC and 5962-0623602QPC are 670MHz low noise amplifiers with ultra-low voltage noise, high speed, low power consumption voltage feedback amplifiers. Both amplifiers are stable at gains as low as 10. Not only do these devices find perfect application in high gain applications, they maintain their performance down to lower gain settings. These amplifiers are available in SBDIP packages. All parts are specified for operation over the -55°C to +125°C temperature range.

File format: PDF Size:107 KB

The 5962-0623501QPC, 5962-0623502QPC 500MHz Rail-to-Rail Amplifiers are single supply rail-to-rail amplifiers with a -3dB bandwidth of 500MHz and a slew rate of 600V/µs. They operate off a very low 11mA supply current and also feature inputs that go to 0.15V below the VS- rail. The 5962-0623501QPC includes a fast-acting disable/power-down circuit. With a 25ns disable and a 200ns enable, the 5962-0623501QPC is ideal for multiplexing applications. The 5962-0623501QPC, 5962-0623502QPC are designed for a number of general purpose video, communication, instrumentation and industrial applications. Both parts are available in 8 Ld SBDIP. All are specified for operation over the -55°C to +125°C temperature range.

File format: PDF Size:114 KB

This document introduces the features and characteristics of Intersil 82C89 CMOS Bus Arbiter

File format: PDF Size:302 KB

82c88 cmos bus controller is a high performance product manufactured using self-aligned silicon gate cmos process (scaled saji iv). the 82c88 provides the control and command timing signals for 80c86, 80c88, 8086, 8088, 8089, 80186 and 80188 based systems. the high output drive capability of the 82c88 eliminates the need for additional bus drivers. static cmos circuit design insures low operating power. the intersil advanced saji i v process results in performance equal to or greater than existing equivalent products at a significant power savings.

File format: PDF Size:246 KB

The 82C84A is a high performance CMOS Clock Generator-driver designed for CMOS and NMOS microprocessors, such as the 80C86, 80C88, 8086, and 8088. It features a crystal controlled oscillator, a divide-by-three counter, and complete 'Ready' synchronization and reset logic. The chip can operate with an external frequency source from DC to 25MHz. It offers low power consumption, TTL compatible inputs/outputs, and supports crystal controlled operation up to 25MHz.

File format: PDF Size:272 KB

This document introduces the features of 82C59A CMOS priority interrupt controller, including product compatibility, operating mode, power characteristics, etc.

File format: PDF Size:380 KB

82C55A is a high performance CMOS version of the industry standard 8255A from Intersil company. It is compatible with 80C86, 80C88 and other microprocessors, and has 24 programmable I/O pins that support 3 working modes. It is fully compatible with TTL level.

File format: PDF Size:460 KB