Key facts
- Brand
- Rotronic
- Model
- HL-1D
- Category
- Other Electronics
- Documents
- 4
- Languages
- EN
- Last added
- 2023-10-16
Start here
Rotronic HL-1D/BL-1D/TL-1D Data Logger Short Instruction Manual
This document serves as a short instruction manual for the Rotronic HL-1D, BL-1D, and TL-1D data loggers. It covers the main functions and installation of these devices, which measure humidity, temperature, pressure, and dewpoint depending on the specific model. The manual includes general descriptions, dimensions, battery installation instructions, and operation details.
Read onlineRotronic HL-1D specifications
| Accuracy | ±5 °C, ±3.0 %RH, ±0.3 °C, ±3 hPa |
|---|---|
| Logging interval | 30 s...24 h |
| Storage capacity | 32,000 to 64,000 lines |
| Battery | 1 x CR2 |
| IP protection type | IP67 |
| Weight | 85 g |
| Dimensions | 90 x 60 x 23 mm |
Source: Rotronic HL-1D/BL-1D/TL-1D Data Logger Short Instruction Manual
All Rotronic HL-1D documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the low battery threshold?
The low battery threshold is 2.6 V.
From: Rotronic HL-1D/BL-1D/TL-1D Data Logger Short Instruction Manual
How do I start or stop data logging?
Press the START/STOP button and hold it down until "LOG" appears on the display.
From: Rotronic HL-1D/BL-1D/TL-1D Data Logger Short Instruction Manual
What is the measurement range for humidity?
The HL-1D data logger can measure relative humidity in a range from 0 to 100 %RH.
From: ROTRONIC HL-1D/TL-1D Data Logger Short Instruction Manual
How do I replace the battery?
Open the BAT lid with a coin, insert the CR2 battery with the correct polarity (+/-), and ensure the O-ring seal is positioned correctly.
From: ROTRONIC HL-1D/TL-1D Data Logger Short Instruction Manual
What is the permitted ambient temperature range?
The permitted ambient temperature range is -30 to 70 °C.
From: Rotronic HL-1D / BL-1D / TL-1D Data Logger Short Instruction Manual
What software is required to configure the device?
The Rotronic HW4 software is required to make settings and download data.
From: Rotronic HL-1D / BL-1D / TL-1D Data Logger Short Instruction Manual