Key facts
- Brand
- MW
- Model
- MW-1
- Category
- Other Electronics
- Industry
- Electronics
- Documents
- 4
- Languages
- EN
- Last added
- 2026-11-17
Start here

MW MW-1 Electronic Anemometer User Manual
The MW MW-1 is an electronic anemometer that measures wind speed in mph, km/h, m/s, knots, and ft/min, with current, average, and maximum readings, a wind speed bar graph, wind chill display, and temperature in Celsius or Fahrenheit. It has an LCD backlight, water-resistant polycarbonate housing, 14-minute auto power off, and operates on a 3V CR2032 lithium battery. Directions cover battery installation, unit changes, measurement, and operating controls.
Read onlineMW-1 specifications
| Wind speed units | mph, km/h, m/s, knots, ft/min |
|---|---|
| Wind speed readings | Current, average, maximum |
| Wind speed bar graph | Included |
| Wind chill display | Included |
| Temperature display | Celsius or Fahrenheit |
| LCD backlight auto-off | 12 seconds |
| Auto power off | 14 minutes |
| Neck band | Included |
| Power supply | CR2032, 3.0 V |
| Temperature limits | 14 to 113°F (-10 to 45°C) |
| Humidity limit | ≤90% RH |
| Display size | 2.32 x 2 in (59 x 51 mm) |
| Housing | Water resistant polycarbonate |
| Weight | 1.84 oz (52.1 g) |
| Agency approvals | CE |
| Wind speed range | 0-30 m/s (0-5860 ft/min, 0-55 knots, 0-90 km/h, 0-65 mph) |
| Wind speed resolution | 0.1 m/s, 19 ft/min, 0.2 knots, 0.3 km/h, 0.2 mph |
| Wind speed threshold | 0.1 m/s, 39 ft/min, 0.1 knots, 0.3 km/h, 0.2 mph |
| Temperature resolution | 0.36°F, 0.2°C |
| Temperature accuracy | ±3.6°F, ±2°C |
All MW-1 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
How do I turn it off?
Press MODE and SET together; auto shut-off occurs after 14 minutes.
What type of refrigerant is used in this wine cooler?
The appliance uses R600a refrigerant, which is environmentally friendly but flammable.
From: MW MW 18.. / MW 24.. Wine Cooler Installation Instructions
How many people are required to safely remove the appliance from the bottom pallet?
Four people are required to safely remove the appliance from the bottom pallet.
From: MW MW 18.. / MW 24.. Wine Cooler Installation Instructions
What is the difference between MW-10 and MW-11?
MW-10 measures free chlorine using DPD1, while MW-11 measures total chlorine using DPD4.
What is the measurement range for these photometers?
The instruments measure chlorine levels from 0.05 to 2.5 ppm.
