Key facts
- Brand
- HRS
- Model
- DF16
- Industry
- Industrial
- Documents
- 2
- Languages
- EN
- Last added
- 2012-05-03
Start here
Hirose DF16 Series 0.5mm Pitch SMT Board to Board Connector Manual
The DF16 series provides 0.5 mm pitch board‑to‑board connections with a low profile stacking height of 2 mm or 2.5 mm, suitable for automatic mounting. Features include high contact reliability, click‑insertion feedback, metal fittings to prevent solder peel, and vacuum pick‑up areas for SMT assembly.
The manual lists detailed electrical specifications, recommended PCB footprints, carrier‑tape dimensions, and precise reflow and manual soldering conditions. Safety precautions address handling of exposed contacts, board warp limits, and cleaning procedures.
HRS DF16 specifications
| Rated Current | 0.3 A |
|---|---|
| Rated Voltage | 50 V AC |
| Insulation Resistance | ≥500 MΩ at 100 V DC |
| Withstand Voltage | 150 V AC for 1 min |
| Contact Resistance | ≤50 mΩ at 100 mA |
| Operating Temperature Range | -35 °C to +85 °C |
| Storage Temperature Range | -10 °C to +60 °C |
| Operating Humidity Range | 40 %–80 % |
| Storage Humidity Range | 40 %–70 % |
| Insulator Material | Polyamide resin (UL94V‑0) |
| Contact Material | Phosphor copper with gold plating |
Source: Hirose DF16 Series 0.5mm Pitch SMT Board to Board Connector Datasheet
All HRS DF16 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What is the rated current of the DF16 connector?
The DF16 connector is rated for a current of 0.3 A.
From: Hirose DF16 Series 0.5mm Pitch SMT Board to Board Connector Datasheet
What soldering temperature is recommended for the DF16 series?
A soldering iron temperature of 290 °C ± 10 °C for about 2 seconds is recommended.
From: Hirose DF16 Series 0.5mm Pitch SMT Board to Board Connector Datasheet
What is the rated current of the DF16 series connector?
The connector is rated for a current of 0.3 A.
From: Hirose DF16 Series 0.5mm Pitch SMT Board to Board Connector Manual
What temperature profile is recommended for reflow soldering?
Preheat to 150 °C for 30–90 s, then ramp to 240 °C, with a soldering zone at 235 °C ± 5 °C for up to 10 s, followed by a cooling zone at 220 °C for 10–20 s.
From: Hirose DF16 Series 0.5mm Pitch SMT Board to Board Connector Manual