Key facts
- Brand
- Colorful
- Model
- P965-MVP
- Category
- Motherboard
- Industry
- Computers
- Documents
- 3
- Languages
- ZH
- Last added
- 2012-03-21
Start here
Colorful C.P965-MVP 2.2 Motherboard User Manual
This manual covers the features and specifications of the Colorful C.P965-MVP 2.2 ATX motherboard, including supported processors, memory configuration, expansion slots, audio, networking, and storage interfaces. It also provides detailed instructions for BIOS configuration, power‑management settings, and advanced chipset options.
Additional sections describe the ATI CrossFire technology, front‑panel audio connections, and a comprehensive FAQ that helps resolve common issues such as power‑on problems, no‑display symptoms, and BIOS upgrade procedures. This manual is written in Chinese.
Colorful P965-MVP specifications
| CPU socket | Intel Socket 775 |
|---|---|
| Chipset | Intel 965P+ICH8 |
| SATA ports | 4 × Serial ATA2 (3 Gb/s) |
| USB ports | 10 × USB 2.0 |
| Network interface | RealTek RTL8110S‑32 Gigabit Ethernet |
| PCI Express slots | 2 × PCIe x16, 1 × PCIe x1, 3 × PCI |
All Colorful P965-MVP documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How many PCI Express slots does the C.P965-MVP Ver2.0 board have?
The board provides two PCI Express x16 slots, one PCI Express x1 slot, and three standard PCI slots.
What is the procedure to clear the CMOS on this motherboard?
Turn off the system, unplug the ATX power, short pins 2‑3 of the JCS2 jumper for about three seconds, restore the jumper to pins 1‑2, then reconnect power.
What should I do if the computer does not power on?
Check that all power cables inside the case are properly connected and not shorted, especially the CPU power connector, and verify that the mains power switch is on.
What network speed does the integrated LAN controller support?
The RealTek RTL8110S‑32 controller provides 10/100/1000 Mbps Ethernet connectivity.
How can I clear the CMOS on this motherboard?
Power off, disconnect the ATX power, short pins 2‑3 of jumper JCS2 for about 3 seconds, then restore the jumper and reconnect power.