The Zhiyuan Electronics PCI-51XX CAN interface card manual provides specifications, installation, driver setup, and usage details for the 1/2‑channel CAN card.
The PCI-51XX series is a PCI‑based CAN interface card that offers one or two electrically isolated CAN channels, supporting CAN 2.0A/B protocols and a baud‑rate range of 5 Kbps to 1 Mbps. Each channel includes full isolation, surge protection, and an optional 120 Ω termination resistor, making it suitable for reliable industrial communication networks.
The manual covers product features, hardware dimensions, electrical specifications, installation steps, driver installation for Windows, Linux and VxWorks, interface functions, test tools, troubleshooting FAQs, and sales/service contacts. It also provides detailed connector pin definitions and termination resistor configuration. This manual is written in Chinese.
| PCI Interface | 32‑bit 33 MHz PCI, PCI 2.2 compatible, plug‑and‑play |
|---|---|
| CAN Controller | NXP SJA1000T |
| CAN Transceiver | NXP PCA82C251 |
| Electrical Isolation Voltage | DC 2500 V |
| Operating Temperature | 0 °C ~ +70 °C |
| Power Requirement | 5 V @ 300 mA (max) |
| FIFO Memory | 8 KB Dual‑Port RAM |
| Physical Size | 130 mm × 90 mm (standard short PCI card) |
| Baud Rate Range | 5 Kbps ~ 1 Mbps |
| Number of CAN Channels | PCI‑5110: 1 channel, PCI‑5121: 2 channels |
The PCI‑5110 model provides a single CAN channel.
The card supports Windows 98/Me, Windows 2000, Windows XP, Linux, and VxWorks.
It requires a 5 V supply with a maximum current draw of 300 mA.
The card has an internal 120 Ω termination resistor that can be enabled via jumpers JP0/JP1, or an external 120 Ω resistor can be added between CAN_H and CAN_L.