X-Rite i1Pro Spectrophotometer User Manual

User manual for the X-Rite i1Pro spectrophotometer, covering setup, calibration, measurement modes, maintenance, troubleshooting, specifications, and system…


X-Rite i1Pro Spectrophotometer User Manual - cover page
Brand
X-Rite
Category
Analyzers
Document type
User Manual
Language
Korean
Pages
43
File format
PDF
File size
2.4 MB
Published
13 November, 2026
Updated
13 November, 2026
Model
i1Pro
MD5 checksum
299419E75D1693832F451C111646E20E

About this manual

The X-Rite i1Pro User Manual covers the i1Pro spectrophotometer, including package contents, device overview, installation, status indicators, calibration, and measurement procedures such as scan, spot, display, ambient light, and projector measurements.

It also describes regular maintenance, troubleshooting, warranty and support information, technical specifications, and minimum system requirements for Macintosh and Windows. This manual is written in Korean.

What's inside

  • Package contents
  • Device overview
  • Installation
  • Status indicators
  • Device calibration
  • Scan measurement
  • Spot measurement
  • Display measurement
  • Specifications
  • System minimum requirements

Specifications

Spectral enginei1® technology (holographic diffraction grating with 128 pixel diode array) with built-in wavelengths check
Spectral range380 - 730 nm
Physical sampling interval3.5 nm
Optical resolution10 nm
Spectral reporting380 nm ... 730 nm in 10 nm steps
Measurement frequency in scanning mode200 measurements per second
Measurement geometry45º/0º ring illumination optics, ISO 13655:2009
Measurement aperture4.5 mm (0.18”) diameter
Illumination spot size3.5 mm (0.14”)
Light sourceGas filled Tungsten (illuminant type A) and UV LED
Reflectance measurementspectral reflectance [dimensionless]
Measurement conditionsUV included - ISO 13655:2009 measurement condition M0 D50 - ISO 13655:2009 measurement condition M1 UV excluded Filter - ISO 13655:2009 measurement condition M2
OBCOptical Brightener Compensation (OBC) with i1Profiler software
CalibrationManual on external ceramic white reference
Measurement backgroundwhite, ISO 13655:2009; for measurements on backup board
Maximal media thickness3 mm (0.12”) on backup board
Minimal patch size in scanning mode7 x 10 mm (0.28” x 0.39”) (Width x Height) with sensor ruler; 10 x 10 mm (0.39” x 0.39”) (Width x Height) without sensor ruler
Inter-Instrument-Agreement0.4 ∆E94* average, 1.0 ∆E94* max.
Short-term repeatability0.1 ∆E94* on white (D50,2°, mean of 10 measurements every 3 s on white)
Emission measurementspectral radiance [mW/nm/m 2/sr], luminance [cd/m2]
Measurement range0.2 - 1200 cd/m2 on a typical LCD-Monitor
Short-term repeatabilityx,y ±0.002 typ. (5000 K, 80 cd/m2)
Ambient light measurementspectral irradiance [mW/nm/m 2], illuminance [lux]
InterfaceUSB 1.1

Frequently asked questions

What USB cable must be used with the i1Pro?

The USB interface cable (2.0 m) shipped with this device must be used to maintain compliance.

What is the spectral range of the i1Pro?

The spectral range is 380 - 730 nm.

What is the measurement geometry of the i1Pro?

The measurement geometry is 45º/0º ring illumination optics, ISO 13655:2009.

What are the minimum Windows system requirements?

Windows XP, Windows Vista, or Windows 7 with an Intel Pentium 4 or AMD Athlon XP or better CPU.

Download PDF (2.4 MB)

More X-Rite Manuals


View all X-Rite manuals →