Key facts
Start here

X-Rite i1Pro Spectrophotometer User Manual
The X-Rite i1Pro is a spectrophotometer with a measurement button, status indicators, positioning sensor, and USB connection. This manual covers package contents, device overview, installation, calibration, and scan, spot, display, ambient light, and projector measurements.
It also describes periodic maintenance, troubleshooting, warranty, service and support, specifications, and minimum system requirements for Windows and Macintosh computers.
X-Rite i1Pro specifications
| Spectral engine | i1® technology (holographic diffraction grating with 128 pixel diode array) with built-in wavelengths check |
|---|---|
| Spectral range | 380 - 730 nm |
| Physical sampling interval | 3.5 nm |
| Optical resolution | 10 nm |
| Spectral reporting | 380 nm ... 730 nm in 10 nm steps |
| Measurement frequency in scanning mode | 200 measurements per second |
| Measurement geometry | 45º/0º ring illumination optics, ISO 13655:2009 |
| Measurement aperture | 4.5 mm (0.18”) diameter |
| Illumination spot size | 3.5 mm (0.14”) |
| Light source | Gas filled Tungsten (illuminant type A) and UV LED |
| Reflectance measurement | spectral reflectance [dimensionless] |
| Measurement conditions | UV included - ISO 13655:2009 measurement condition M0 D50 - ISO 13655:2009 measurement condition M1 UV excluded Filter - ISO 13655:2009 measurement condition M2 |
| OBC | Optical Brightener Compensation (OBC) with i1Profiler software |
| Calibration | Manual on external ceramic white reference |
| Measurement background | white, ISO 13655:2009; for measurements on backup board |
| Maximal media thickness | 3 mm (0.12”) on backup board |
| Minimal patch size in scanning mode | 7 x 10 mm (0.28” x 0.39”) (Width x Height) with sensor ruler; 10 x 10 mm (0.39” x 0.39”) (Width x Height) without sensor ruler |
| Inter-Instrument-Agreement | 0.4 ∆E94* average, 1.0 ∆E94* max. |
| Short-term repeatability | 0.1 ∆E94* on white (D50,2°, mean of 10 measurements every 3 s on white) |
| Emission measurement | spectral radiance [mW/nm/m 2/sr], luminance [cd/m2] |
| Measurement range | 0.2 - 1200 cd/m2 on a typical LCD-Monitor |
| Short-term repeatability | x,y ±0.002 typ. (5000 K, 80 cd/m2) |
| Ambient light measurement | spectral irradiance [mW/nm/m 2], illuminance [lux] |
| Interface | USB 1.1 |
All X-Rite i1Pro documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What USB cable must be used with the i1Pro?
The USB interface cable (2.0 m) shipped with this device must be used to maintain compliance.
What is the spectral range of the i1Pro?
The spectral range is 380 - 730 nm.
When should I perform a calibration?
You should perform a calibration when you use a new paper for the first time, when you change toner bottles, or if printed colors change over time.
What is the recommended paper size for high accuracy calibration?
You can select high accuracy when printing with SRA3, A3, or 11 × 17 paper.
What should I do before connecting the i1Pro to USB?
Install the software application from the DVD first and do not plug in the USB cable until installation is complete.
How do I calibrate the i1Pro?
Place the device on the matching calibration plate, set the software for calibration, and press the measurement button.
