Operation and safety manual for the Tuthill TT10P in-line turbine meter, covering technical data, installation, operation, calibration, and safety warnings.
The Tuthill TT10P is an electronic in-line turbine meter for hazardous locations and extreme temperatures, with a flow range of 2 to 35 U.S. GPM and intrinsically safe electronics. It stores and displays batch or cumulative totals in ounces, pints, quarts, liters, or gallons and provides 20 preset calibration factors for different fluid viscosities.
The manual covers safety warnings, technical information, fluid compatibility, installation and module orientation, operational functions, unit changes, calibration, flush mode, total reset, K-factor check, and battery replacement.
| Flow ports | 1" NPT or BSPP female inlet and outlet ports |
|---|---|
| Flow range | 2 to 35 U.S. GPM / 7.6 to 132.5 LPM |
| Working pressure at or below 120°F (49°C) | 125 PSI (8.6 Bar) |
| Working pressure above 120°F (49°C) | 50 PSI (3.5 Bar) |
| Storage temperature | -40°F to 176°F (-40°C to 60°C) |
| Operating temperature | -15°F to 176°F (-26°C to 60°C) |
| Measurement repeatability | ±0.30% (Batch sizes ≥ 2 Gallons) |
| Measurement units | Ounce, Pint, Quart, Liter, Gallon |
| Totalizer range | 0 - 90,000,000 Units |
| Batch range | 0.00 - 9999 Units |
| Display temperature range | -40°F to 176°F (-40°C to 60°C) |
| Power | 2 approved alkaline batteries |
| Memory | Meter totals and calibration are preserved when replacing batteries |
| Safety | Intrinsically safe electronics for use in hazardous locations |
| Fluid viscosity range | 0.4 cSt to 79 cSt |
125 PSI (8.6 Bar).
Most chemicals with viscosities from 0.4 cSt to 79 cSt.
No, meter totals and calibration are preserved when replacing batteries.
Hold buttons ON and 4 together for 5 seconds.