This manual contains valuable information about your new equipment and its operating and service requirements
This manual provides instructions for operating and safely using the Tuthill TT10P in-line turbine meter. It includes safety warnings, installation guidelines, operational functions, and calibration procedures. The meter is designed for hazardous locations and extreme temperatures, with features like selectable units and calibration factors for different fluids. Power is supplied by two AA alkaline batteries, and the display can be oriented for left-to-right or right-to-left flow.
The TT10P handles fluids with viscosities from 0.4 cSt to 79 cSt, with limited accuracy for higher viscosities. It features a totalizer for batch and cumulative measurements, and can store data even when batteries are replaced. Safety precautions include grounding connected piping, avoiding overpressure, and using proper sealants during installation.
| Flow Range | 2 to 35 U.S. GPM / 7.6 to 132.5 LPM |
|---|---|
| Working Pressure (≤120°F) | 125 PSI (8.6 Bar) |
| Storage Temperature | -40°F to 176°F (-40°C to 60°C) |
| Operating Temperature | -15°F to 176°F (-26°C to 60°C) |
| Accuracy | +1.0% (After field calibration) |
| Repeatability | +0.30% (Batch sizes = 2 Gallons) |
| Units | Ounce, Pint, Quart, Liter, Gallon |
| Totalizer Range | 0- 90,000,000 Units |
| Batch Range | 0.00 - 9999 Units (Blinks when Batch exceeds 9999) |
| Wetted Materials | 304/316 Stainless Steel, Polypropylene, UHMWPE, Gold |
| Display Temperature Range | -40°F to 176°F (-40°C to 60°C) |
| Power Source | 2 approved alkaline batteries |
The maximum operating pressure is 125 PSI (8.6 Bar) for temperatures ≤120°F (49°C).
The TT10P handles most chemicals with viscosities from 0.4 cSt to 79 cSt. Fluids exceeding 79 cSt may be metered with limited accuracy.
Hold buttons [2] and [3] for three seconds to show the firmware version, then press button [2] repeatedly until the desired unit (ounces, pints, quarts, liters, or gallons) is displayed. Press button [2] again to lock in the selection.
The accuracy is ±1.0% after field calibration.