Key facts
- Brand
- Tuthill
- Model
- TT10P
- Category
- Other products
- Documents
- 3
- Languages
- EN
- Last added
- 2026-11-10
Start here

Tuthill TT10P In-line Turbine Flow Meter Operation and Safety Manual
The TT10P is an electronic in-line turbine meter for hazardous locations and extreme temperatures. It stores and displays batch or totalizer volumes in ounces, pints, quarts, liters, or gallons, and offers 20 preset calibration factors for different fluid viscosities.
Installation, unit changes, fluid calibration, flush mode, accumulated-total reset, K-factor check, and battery replacement are described. Safety limits include a maximum internal pressure of 125 PSI (8.6 Bar) for TT10P models and proper grounding near flammable fluids.
Tuthill TT10P specifications
| Flow ports | 1" NPT or BSPP female inlet and outlet ports |
|---|---|
| Flow range | 2 to 35 U.S. GPM / 7.6 to 132.5 LPM |
| Working pressure at or below 120°F (49°C) | 125 PSI (8.6 Bar) |
| Working pressure above 120°F (49°C) | 50 PSI (3.5 Bar) |
| Storage temperature | -40°F to 176°F (-40°C to 60°C) |
| Operating temperature | -15°F to 176°F (-26°C to 60°C) |
| Measurement repeatability | ±0.30% (Batch sizes ≥ 2 Gallons) |
| Measurement units | Ounce, Pint, Quart, Liter, Gallon |
| Totalizer range | 0 - 90,000,000 Units |
| Batch range | 0.00 - 9999 Units |
| Display temperature range | -40°F to 176°F (-40°C to 60°C) |
| Power | 2 approved alkaline batteries |
| Memory | Meter totals and calibration are preserved when replacing batteries |
| Safety | Intrinsically safe electronics for use in hazardous locations |
| Fluid viscosity range | 0.4 cSt to 79 cSt |
Source: Tuthill TT10P In-line Turbine Meter Operation and Safety Manual
All Tuthill TT10P documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the working pressure at or below 120°F (49°C)?
125 PSI (8.6 Bar).
From: Tuthill TT10P In-line Turbine Meter Operation and Safety Manual
What viscosity range can the TT10P meter handle?
Most chemicals with viscosities from 0.4 cSt to 79 cSt.
From: Tuthill TT10P In-line Turbine Meter Operation and Safety Manual
What is the flow range of the TT10P meter?
2 to 35 U.S. GPM (7.6 to 132.5 LPM).
From: Tuthill TT10P In-line Turbine Flow Meter Operation and Safety Manual
What units can the TT10P display?
Ounces, pints, quarts, liters, and gallons.
From: Tuthill TT10P In-line Turbine Flow Meter Operation and Safety Manual
What is the maximum operating pressure for the TT10P model?
The maximum operating pressure is 125 PSI (8.6 Bar) for temperatures ≤120°F (49°C).
From: Tuthill TT10P In-line Turbine Meter Operation and Safety Manual
What fluids are compatible with the TT10P meter?
The TT10P handles most chemicals with viscosities from 0.4 cSt to 79 cSt. Fluids exceeding 79 cSt may be metered with limited accuracy.
From: Tuthill TT10P In-line Turbine Meter Operation and Safety Manual
