TRINAMIC TMC2300 Stepper Motor Driver Datasheet

The TRINAMIC TMC2300 is a low-voltage two-phase stepper motor driver with integrated MOSFETs, StealthChop2 silent operation, StallGuard4 load detection, and…


TRINAMIC TMC2300 Stepper Motor Driver Datasheet - cover page
Brand
Trinamic
Category
INTEGRATED CIRCUITS
Document type
Datasheet
Language
English
Pages
69
File format
PDF
File size
1.6 MB
Published
15 November, 2026
Updated
15 November, 2026
Model
TMC2300
MD5 checksum
2011BE4952A0A5DAA2EEDC65466E747C

About this manual

The TMC2300 is a compact stepper motor driver IC designed for battery-operated and space-constrained applications. It integrates power MOSFETs with an internal charge pump to achieve low RDSon resistance at low supply voltages, enabling operation from a single Li-Ion cell or dual AA batteries down to 1.8V. The driver supports up to 1.2A RMS motor current per coil and features TRINAMIC's StealthChop2 technology for silent motion, StallGuard4 for sensorless stall detection, and CoolStep for load-dependent current reduction to extend battery life.

The device offers two operating modes: a standalone STEP/DIR mode with pin-selected microstep resolution (up to 256 microsteps via microPlyer interpolation), and a UART-controlled mode that enables full diagnostics, CoolStep, StallGuard, passive braking, and an internal step pulse generator. A single-wire UART interface provides access to configuration registers and status flags. The TMC2300 is packaged in a 3x3mm QFN20 with an exposed die pad for thermal management.

What's inside

  • Principles of Operation
  • Pin Assignments
  • Sample Circuits
  • UART Single Wire Interface
  • Register Map
  • StealthChop
  • Motor Current Control
  • StallGuard4 Load Measurement
  • CoolStep Operation
  • Electrical Characteristics

Specifications

Supply Voltage Range2V (1.8V min) to 11V DC
Motor Current1.2A RMS, 2A peak per coil
Standby Current<50nA typical
Microstep ResolutionUp to 256 microsteps via microPlyer interpolation
RDSon (Low/High Side)170mΩ typical each
PackageQFN20 3x3mm with exposed die pad
Control InterfaceSTEP/DIR and single-wire UART

Frequently asked questions

What is the supply voltage range for the TMC2300?

The TMC2300 operates from 2V (1.8V minimum) to 11V DC, suitable for battery-powered devices.

What is the maximum motor current the TMC2300 can drive?

The driver supports up to 1.2A RMS and 2A peak current per coil.

What is StealthChop2 technology?

StealthChop2 is TRINAMIC's silent chopper technology that ensures noiseless stepper operation at low velocities.

Does the TMC2300 have a UART interface for configuration?

Yes, it features a single-wire UART interface for advanced configuration and diagnostics.

Download PDF (1.6 MB)

More Trinamic Manuals


View all Trinamic manuals →