The TG-NET V3.2 Router User Manual provides step‑by‑step installation, configuration, security, QoS and management instructions for the TG-NET router.
This manual covers the complete setup of the TG‑NET router, starting with hardware installation, power requirements, and initial device startup. It explains how to connect a PC to the LAN port, access the web management interface, and configure basic network parameters such as IP address, DHCP and static routing.
Further sections detail advanced features including multi‑line routing, QoS smart flow control, virtual private network (PPTP/L2TP/IPSec), authentication management for public Wi‑Fi, AP management, and system diagnostics. Appendices provide configuration examples for enterprise and internet‑café deployments. This manual is written in Chinese.
| Power Supply | Standard 220 V AC |
|---|---|
| Default LAN IP | 192.168.1.1 |
| Power Indicator | Lights when device is powered |
| System Indicator | Lights when system is running normally |
| WAN Port Function | Connects to ADSL, fiber or Ethernet |
| Reset Button | Restores factory defaults |
Connect a PC to the router’s LAN port, set the PC’s IP to the 192.168.1.x range, then open a browser and go to 192.168.1.1.
In the QoS settings, turn on the “Smart Flow Control” option and save the configuration; the router will then prioritize traffic automatically.
The router’s LAN interface uses 192.168.1.1 as its default IP address.
The device must be powered from a standard 220 V AC mains supply.