Rosslare AY-H6255BT Smart Card Reader Installation and User Manual

Rosslare AY-H6255BT smart card reader installation and user manual covering wiring, specifications, OSDP, BLE/NFC operation, and LED indicators.


Rosslare AY-H6255BT Smart Card Reader Installation and User Manual - cover page
Brand
Rosslare
Category
Other Electronics
Document type
User Manual
Language
English
Pages
8
File format
PDF
File size
817 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
260838E3E653819BE7EDAE7D4497A075

About this manual

The Rosslare AY-H6255BT is a smart card reader with a built-in 13.56 MHz CSN smart card reader, an NFC ID reader, and a Bluetooth BLE ID reader. It supports Wiegand and OSDP communication and the manual covers the installation kit, wiring, technical specifications, configuration card programming, DIP switch addressing, and LED operation.

The document also includes FCC and Radio Equipment Directive declarations, limited warranty information, international standards approvals, and contact information. A separate section documents the BLE-Admin app for configuring AY-H6x55BT readers, including password, firmware update, read range, language, and automation settings.

What's inside

  • Introduction
  • Installation Kit
  • Technical Specifications
  • Wiring
  • Bluetooth NFC ID and BLE ID Operation
  • Configuration Card Programming
  • OSDP Operation
  • LEDs Operation
  • Declaration of Conformity

Specifications

Power Supply TypeRegulated
Operating Voltage Range8 to 16 VDC
Current at 12 V110 mA standby, 185 mA max
Bluetooth BLE Read Range1 m to 10 m (3.2 to 32.5 ft) line of sight
RFID and NFC Read Range5 cm to 10 m (2.0 to 3.9 in.)
LED/Buzzer ControlsDry Contact, N.O.
Tamper OutputOpen collector, active low, max. sink current 16 mA
Maximum Cable Distance to Controller (Wiegand)150 m (500 ft) with 18-AWG cable
Maximum Cable Distance to Controller (OSDP)1,200 m (4,000 ft) with 2x2 18-AWG twisted shielded cable
Operating Temperature Range-35°C to 66°C (-31°F to 150°F)
Operating Humidity Range0 to 95% (non-condensing)
Outdoor UsageWeather-resistant, UV-resistant, meets IP65, epoxy-potted, suitable for indoor and outdoor use
Dimensions (H x W x D)110.7 x 75.0 x 17.0 mm (4.4 x 3.0 x 0.7 in.)
Weight177 g (6.2 oz)
FCC IDGCD-AYH6X55BT

Frequently asked questions

What is the default password for the BLE-Admin app?

The default password upon initial use is 12345678.

What does setting DIP switch 1 to Off select?

It selects Wiegand output.

What happens to the right LED in OSDP mode if the connection is lost?

The right LED flashes yellow continuously.

What is the NFC ID read range?

NFC ID works at a range of 3 to 10 cm.

Download PDF (817 KB)

More Rosslare Manuals


View all Rosslare manuals →