PR electronics 2229 switchmode voltage regulator product manual 2229V102-UK: application, mounting, input/output, electrical specifications and ordering.
This is the PR electronics product manual for the 2229 switchmode voltage regulator, document no. 2229V102-UK, valid from serial no. 219047001. It describes the application of the module as a general voltage regulator, as a power-efficient pre-regulator for a 5 VDC linear regulator, and as an adjustable power supply controlled from an external potentiometer. The manual covers technical characteristics, mounting, input, output, electrical specifications, ordering, block diagram and document history.
The 2229 is based on switchmode technology and mounts in a standard 11-pole relay socket in all positions. The output is adjustable from a front potentiometer in the range 5...24 VDC or from an external 20 kΩ potentiometer, a green LED indicates active output, and short-circuit and thermal overload protection are included. Electrical specifications list AC/DC input limits, output voltage, output power and current, environmental conditions and observed authority requirements such as EMC, RoHS and EAC.
| Output voltage | 4.5...26.4 VDC |
|---|---|
| Output power | Max. 40 W |
| Output current | Max. 2.5 A / 5 VDC; Max. 1.7 A / 24 VDC |
| Input voltage (AC) | Max. 28 VAC |
| Input voltage (DC) | Max. 40 VDC |
| Frequency | 50...60 Hz |
| Current limit (short circuit) | Typ. 5.8 A |
| Output ripple | < 20 mVRMS |
| Operating temperature | -20 to +60°C |
| Protection degree | IP50 |
| Dimensions (HxWxD) | 80.5 x 35.5 x 84.5 mm (D excl. pins) |
| Weight | 170 g |
The output is adjustable from the front potentiometer in the range 5...24 VDC, or from an external 20 kΩ potentiometer.
It is made for standard 11-pole socket mounting in all positions; vertical mounting with at least 10 mm between neighbouring units is recommended for maximum cooling.
The maximum output power is 40 W.
Short-circuit protection limits the current to typically 5.8 A and zeroes the voltage; when the short circuit is removed the output returns to the adjusted value.