The 4184 Universal Mono/Bi-Polar Signal Transmitter is a 6 mm isolation device developed on microprocessor technology, which is compact, responsive and high quality, providing excellent performance and anti-electromagnetic interference for dedicated applications at an extremely low total cost of ownership. It can be installed horizontally or vertically, and there is no gap between devices.
This document is the Chinese installation guide (document no. 4184V103-CN) for the PR electronics 4184 universal mono/bi-polar signal transmitter from the 4000 series of 6 mm isolators. It describes a microprocessor-based module that measures DC voltage and current inputs up to ±300 V / ±100 mA with a minimum measurement range down to 25 mV / 0.5 mA, and provides passive/active current outputs and buffered voltage outputs. The 4184 is designed for SIL 2 installations and systems with performance level (PL) "d" according to ISO-13849.
The guide covers safety instructions and warnings, mounting and removal of 4000 series modules on DIN rails, applications, technical characteristics, wiring, the detachable PR 4500 display/programming panel, configuration and operation keys, menu flowcharts including advanced settings, and a document revision history. All parameters are password protected, and the PR 4500 panel can be moved between devices to download configurations. This manual is written in Chinese.
| Input measurement range | up to ±300 V DC / ±100 mA, minimum range 25 mV / 0.5 mA |
|---|---|
| Response time | < 20 ms |
| Accuracy | < 0.05% |
| Power supply | 21.6...253 VAC / 19.2...300 VDC |
| Current output load | up to 1000 ohm |
| Adjustable response time | 0.0...60.0 s |
| Signal-to-noise ratio | > 60 dB |
| Isolation test | 2.3 kVAC, 3-port |
| UL file number | E248256 |
| Maximum ambient temperature (UL) | 60°C |
The 4184 accepts a universal supply of 21.6...253 VAC or 19.2...300 VDC.
Yes, the 4184 is designed to strict safety requirements and is suitable for SIL 2 installations, as well as systems with performance level "d" per ISO-13849.
The 4000 series must be mounted on a DIN rail according to DIN EN 60715; the module can be installed side by side without clearance.
Yes, the detachable PR 4500 display/programming panel provides parameter configuration, process monitoring, 2-point process calibration and enhanced diagnostics.