User manual for the People JBK series machine tool control transformer, covering use, ratings, dimensions, installation, and ordering.
The People JBK series machine tool control transformer is a single-phase multi-winding transformer used for control power in machine tools and general electrical equipment, and for local lighting and indicator lamps. It is suitable for AC 50/60 Hz circuits up to 660 V and can work continuously at rated load.
The manual describes model meanings, transformer structure, dimensions and mounting sizes, installation and wiring, normal operating conditions, and ordering notes. It also states temperature-rise limits, conductor cross-section guidance, warranty terms, and the need for reliable grounding. This manual is written in Chinese.
| Rated capacity | 40, 63, 100, 160, 250, 400, 630, 1000, 1600, 2500 VA |
|---|---|
| Rated input voltage | 220 V or 380 V |
| Rated output voltage | 6 (6.3), 12, 24, 36, 110, 127, 220 (380) V |
| Operating frequency | 50/60 Hz |
| Maximum circuit voltage | 660 V and below |
| Altitude | Not more than 2000 m |
| Ambient temperature | -5 to +40 C |
| Relative humidity | Up to 90% in the wettest month |
| Vibration | No severe vibration or shock |
| Installation environment | No explosive medium; no corrosive metal, insulating-damaging gas, or conductive dust |
| Weather exposure | Not exposed to rain or snow |
| Power voltage waveform | Approximately sinusoidal |
| Temperature rise | Not more than 80 K |
| Indicator winding capacity | Not less than 3 VA |
| Lighting winding capacity | Not less than 40 VA |
| Primary voltage adjustment | Plus or minus 5% |
| Warranty | 18 months from production date or 12 months from purchase date |
It is used for control power in machine tools and general electrical equipment, and for local lighting and indicator lamps.
Normal operation requires an altitude not more than 2000 m.
The manual provides a table of nominal conductor cross-sections from 0.75 to 10.00 mm2 based on rated input current.
The product is covered for 18 months from the production date or 12 months from the purchase date for manufacturing quality defects.