Maxim Integrated MAX22444–MAX22446 Digital Isolator Evaluation Kit User Manual

The Maxim Integrated MAX22444–MAX22446 evaluation kits evaluate reinforced four-channel digital isolators with 1.71V to 5.5V supplies and up to 5kV RMS…


Maxim Integrated MAX22444–MAX22446 Digital Isolator Evaluation Kit User Manual - cover page
Brand
Maxim Integrated
Category
Other Electronics
Document type
User Manual
Language
English
Pages
12
File format
PDF
File size
1.5 MB
Published
18 November, 2026
Updated
18 November, 2026
MD5 checksum
910178100578DC1CB18A38DD5EE30A9F

About this manual

The MAX22444–MAX22446 evaluation kits provide a proven design for evaluating the MAX22444–MAX22446 family of reinforced, four-channel galvanic digital isolators. Two board types are available: the assembled MAX22445FWEVKIT# with MAX22445FAWE+ populated, and the generic MAX2244XWEVKIT# with U1 unpopulated so the user can install a selected device from the family.

Both boards support the wide-body 16-pin SOIC package and are powered from two independent isolated supplies nominally from 1.71V to 5.5V; a single supply can be used for electrical-parameter tests without isolation. SMA connectors, jumper/shunt positions, and power/test points are documented for connecting signal sources and an oscilloscope.

What's inside

  • General Description
  • Features
  • EV Kit Options
  • Quick Start
  • Board Connectors and Shunt Positions
  • Connector Configurations
  • Detailed Description of Hardware
  • External Power Supplies
  • Typical Test Setup

Specifications

Data Transfer RateDC to 200Mbps
ChannelsFour unidirectional channels
IsolationGuaranteed up to 5kV RMS for 60s
Power Supply Voltage Range1.71V to 5.5V
Temperature Range-40°C to +125°C
Package TypeWide-body 16-pin SOIC
MAX22445FWEVKIT# ConfigurationFully assembled and tested, populated with MAX22445FAWE+
MAX2244XWEVKIT# ConfigurationGeneric board with U1 unpopulated

Frequently asked questions

What devices can the MAX2244XWEVKIT# evaluate?

It is a generic board with U1 unpopulated, allowing the user to select a device from the MAX22444–MAX22446 family.

What power supply voltage do the EV kits require?

The EV kits should be powered from two independent isolated power supplies with nominal output voltage from 1.71V to 5.5V.

Which EV kit is fully assembled and tested?

The MAX22445FWEVKIT# is fully assembled and tested and comes populated with the MAX22445FAWE+.

Can a single power supply be used?

Yes, a single power supply can also be used for evaluating electrical parameters without isolation between the two sides.

Download PDF (1.5 MB)

More Maxim Integrated Manuals


View all Maxim Integrated manuals →