Keystone step-by-step installation instructions for a 36" wood burning outdoor fireplace built with the Stonegate 3-pc system.
This guide from Keystone Hardscapes gives course-by-course installation instructions for a 36" wood burning outdoor fireplace built from Stonegate wall units and finished with caps. It is part of the Keystone Step-by-Step Kits series and covers tools and materials needed, foundation requirements, block layout and leveling, and the fireplace insert and chimney sections that ship with the kit.
The document also lists the Stonegate units, caps, interlocking pins, mantel piece and concrete adhesive required, and notes that local codes govern fireplace and chimney clearances. The insert's own installation manual must be followed for fitting the fireplace insert and extending the chimney above the roof.
| Fireplace insert size | 36" |
|---|---|
| Stonegate unit dimensions | 6" high x 10" deep |
| Mantel piece dimensions | 3"h x 70"w x 10"d |
| Chimney sections included | 12" and 48" sections |
| Interlocking pins required (approx.) | 570 |
| Concrete adhesive required | 25 tubes |
| Adhesive application | two 1/4" strips on each course |
The guide lists basic tools including a shovel, wheelbarrow, gloves, levels, safety glasses, layout stakes, hand compactor, concrete saw, mallet, line, caulking gun and stone chisel.
Keystone recommends using its fiberglass pins where alignment allows, together with concrete adhesive to maximize the stability of the structure.
You must refer to the installation manual included with the fireplace insert for proper installation instructions.
Local codes govern fireplace and chimney clearances and the chimney extension above the roof.