User manual for the JBL QUANTUM300 gaming headset, covering the box contents, controls, setup, USB and 3.5 mm connections, specifications, and troubleshooting.
This manual describes the JBL QUANTUM300 gaming headset and provides step-by-step instructions for installing and starting to use it. It covers the headset controls, wearing and fitting the headset, initial PC setup, and connection through the USB audio adapter or a 3.5 mm plug.
The document also lists product specifications and troubleshooting steps for low or no sound and for chat microphone issues. This manual is written in Portuguese.
| Driver size | 50 mm dynamic drivers |
|---|---|
| Frequency response | 20 Hz to 20 kHz |
| Maximum input power | 30 mW |
| Sensitivity | 100 dB SPL at 1 kHz / 1 mW |
| Impedance | 32 Ohms |
| Microphone frequency response | 100 Hz to 10 KHz |
| Microphone sensitivity | -40 dBV at 1 kHz / Pa |
| Microphone pickup pattern | Directional |
| Microphone size | 4 mm × 1.5 mm |
| Cable length | Headset (1.2 m); USB audio adapter (1.5 m) |
| Weight | 245 g |
| Software platform | Windows 7 or Windows 10 (64-bit) |
| Free disk space | 500 MB |
The box contains the JBL QUANTUM300 headset, a USB audio adapter, a quick start guide with warranty card and safety sheet, and a noise-reducing foam boom microphone.
Connect the USB cable of the USB audio adapter to a USB-A port on the PC or Mac, then plug the headset's 3.5 mm plug into the USB audio adapter.
Yes. Plug the headset's 3.5 mm plug into the headphone output of a PC, Mac, smartphone, or game console.
Confirm that JBL QUANTUM300 is selected as the default device in the sound settings, adjust the volume, and check that the USB connection or 3.5 mm plug is fully seated.