International Interdur 8862 is a two-component epoxy topcoat; this data sheet covers application, drying times, surface preparation and system compatibility.
Interdur 8862 is a two-component epoxy topcoat supplied as two packs that are mixed 4 parts base to 1 part curing agent by volume. It can be applied by airless spray, air spray, brush or roller and is intended as a durable topcoat over suitable primers in environments such as offshore installations, petrochemical plants, bridges, pulp and paper mills and power plants.
The data sheet gives color and gloss information, volume solids, typical dry film thickness, theoretical spreading rate and drying times at 10, 15, 25 and 40 °C. It also describes surface preparation for primed surfaces, concrete and plaster, mixing and application instructions, thinner and cleaner recommendations, suitable primers and topcoats, safety notes, packaging, storage and regulatory VOC data. This manual is written in Chinese.
| Gloss | Semi-gloss |
|---|---|
| Volume solids | 51% ± 3% (depending on color) |
| Typical dry film thickness | 50 µm (2 mils) |
| Theoretical spreading rate | 10.20 m²/L at 50 µm dry film thickness |
| Mix ratio | 4 parts A : 1 part B by volume |
| Flash point | Part A 27 °C (81 °F); Part B 29 °C (84 °F); mixed 28 °C (82 °F) |
| Weight per volume | 1.34 kg/L (11.2 lb/gal) |
| VOC | 420 g/L (US EPA Method 24) |
| Minimum curing temperature | Above 5 °C (41 °F) |
| Storage life | At least 12 months at 25 °C (77 °F) |
Mix 4 parts of the base (part A) with 1 part of the curing agent (part B) by volume.
The product does not cure sufficiently below 5 °C (41 °F); for best performance the curing temperature should be above 10 °C (50 °F).
Interdur 8801, Interdur 8815 and Interdur 8840 are listed as suitable primers.
At 25 °C (77 °F) the storage life is at least 12 months; after that it should be inspected before use.