Interzinc 52 is a two-component epoxy zinc-rich primer that meets the composition and performance requirements of SSPC Paint 20. It is a high-performance primer that provides optimum protection in a variety of corrosive environments, including marine structures, petrochemical plants, paper mills, bridges, and power plants. Interzinc 52 can be used for maintenance of existing metal structures and can also provide excellent corrosion protection for new structures.
International Interzinc 52 is a two-component epoxy zinc-rich primer that meets SSPC Paint 20 and is used as part of a high-performance anti-corrosion coating system for new steel and maintenance of existing steel.
It has a volume solids content of 59% and is typically applied at 50-75 microns dry film thickness. The product is mixed in a 4:1 volume ratio and can be applied by air spray, airless spray or brush. This manual is written in Chinese.
| Product weight | 2.52 kg/l |
|---|---|
| VOC (EU) | 152 g/l |
| Mixing ratio | 4:1 by volume |
| Minimum dry film thickness | 40 microns (1.5 mils) |
| Maximum dry film thickness | 150 microns (6 mils) |
| Flash point (mixed) | 29°C (84°F) |
Mix Component A and Component B in a ratio of 4 parts to 1 part by volume.
International GTA220 (or GTA415) may be used as thinner, subject to local regulations.
Apply Interzinc 52 to a minimum dry film thickness of 40 microns (1.5 mils).
It meets the composition and performance requirements of SSPC Paint 20.