International Interchar 973 Acrylic Intumescent Fire-Resistant Coating Data Sheet

Interchar 973 is a single-component, solvent-based, high-solids expansion fire-resistive coating that has been independently tested for its fire-resistive performance on steel structures and meets a variety of relevant standards. The product can provide a maximum fire rating of 2 hours for I-beams, steel beams, and columns. It is suitable for both site and off-site application and can be applied over a variety of approved primer systems, due to its fast-drying and fast-recoat properties.


International Interchar 973 Acrylic Intumescent Fire-Resistant Coating Data Sheet - cover page
Brand
International
Category
Chemical products
Document type
Product Leaflet
Language
Chinese
Pages
4
File format
PDF
File size
331 KB
Published
03 November, 2023
Updated
03 November, 2023
MD5 checksum
B78AE4C32B5D4CA42E0B33A2148BD604

About this manual

This is the Chinese-language product data sheet for International Interchar 973, an acrylic intumescent fire-resistant coating from AkzoNobel's International Protective Coatings range. It describes the product as a single-component, solvent-based, high-solids intumescent coating that has been independently tested for fire performance on steel structures, and states a design use of up to 2 hours fire resistance for H-section steel, steel beams and steel columns. Because it dries and can be recoated quickly, it is described as suitable for both shop and site application over a range of approved primer systems.

The document gives coating data (color, gloss, volume solids, film thickness, theoretical spreading rate), drying and recoating times at 10 °C, 15 °C and 25 °C, surface preparation requirements, application and mixing instructions, a tropical grade for hot climates, approved primers and topcoats, VOC and weight data, packaging, storage and safety notes. This manual is written in Chinese.

What's inside

  • 产品说明
  • 设计用途
  • 涂装数据
  • 表面处理
  • 施工
  • 产品特性
  • 系统配套性
  • 补充信息
  • 安全注意事项
  • 包装规格

Specifications

Volume solids70% ± 2%
ColorWhite, light gray
Typical dry film thickness300-700 µm (12-28 mils)
Maximum dry film thickness in one coat700 µm
Theoretical spreading rate1 m²/liter at 700 µm dry film
Application methodsAirless spray, brush
VOC267 g/kg
Shelf lifeAt least 12 months at 25 °C

Frequently asked questions

What temperature and humidity are required for application?

Air and steel substrate temperature must be above 10 °C and relative humidity below 85%, with the surface at least 3 °C above dew point.

What is the maximum dry film thickness in a single coat?

One coat can give a maximum dry film thickness of 700 µm.

Which topcoats are approved for use over Interchar 973?

The approved topcoats listed are Interfine 878, Intersheen 579, Interthane 870 and Interthane 990.

How long can the product be stored?

Shelf life is at least 12 months at 25 °C, after which the product must be checked; store dry and cool, away from heat and ignition sources.

Download PDF (331 KB)

More International Manuals


View all International manuals →