User manual for Hongrun OHR-G500/G500R series LCD manual operators and recorders, covering installation, wiring, operation, and technical specifications.
The Hongrun OHR-G500/G500R series are LCD manual operators and recorders designed as backup instruments for regulators or computer control systems. They accept synchronized setpoint and feedback signals, perform regulation based on external setpoints, output corresponding control signals, and can directly drive valves or work with actuators for solenoid valves, control valves, and inverters.
The instruments feature surface-mount technology, multiple protection and isolation designs for strong anti-interference and high reliability. They include USB data export with up to 720 days of storage, a 3.5-inch backlit dot-matrix LCD, panel touch-key configuration, and support for a wide range of input signals including current, voltage, thermocouples, and RTDs. This manual is written in Chinese.
| Measurement input signals | Current (0-20mA, 4-20mA, etc.), voltage (0-5V, 1-5V, etc.), thermocouples (B, S, K, E, T, J, R, N, F2, Wre3-25, Wre5-26), RTDs (Pt100, Cu50, Cu53, Cu100, BA1, BA2), linear resistance (0-400Ω) |
|---|---|
| Analog output signals | 4-20mA (load ≤480Ω), 0-20mA (load ≤480Ω), 0-10mA (load ≤960Ω), 1-5V (load ≥250kΩ), 0-5V (load ≥250kΩ), 0-10V (load ≥4kΩ) |
| Switch output types | Relay (AC220V/2A, DC24V/2A), SSR drive (DC12V±2.5V/30mA), SCR trigger (AC400V/0.5A) |
| Feed output | DC24V±1, load current ≤50mA |
| Communication interfaces | RS485 and RS232, Modbus RTU, baud rate 1200-19200bps, RS485 distance up to 1km, RS232 up to 15m |
| Measurement accuracy | 0.2%FS ±1 digit |
| Setting method | Panel touch keys, password lock, power-off retention |
| Display | 3.5-inch backlit 128×64 dot-matrix LCD, Chinese/English, curves, bar graphs |
| Recording interval options | 1, 2, 4, 6, 15, 30, 60, 120, 240 seconds |
| Maximum storage duration | 3 days at 1s interval to 720 days at 240s interval |
| Data backup | USB flash drive up to 16GB, SD card up to 16GB |
| Print interface | RS-232C, compatible with SP-A40SH series serial printers |
| Operating environment | -10 to 50°C, ≤85% RH, no strong corrosive gases |
| Power supply | AC 100-240V 50/60Hz or DC 12-36V |
| Dimensions (W×H×D) | Horizontal: 160×80×110mm; Vertical: 80×160×110mm; Square: 96×96×110mm |
It supports current, voltage, thermocouple, RTD, and linear resistance signals.
The recording interval can be set to 1, 2, 4, 6, 15, 30, 60, 120, or 240 seconds.
Up to 720 days at a 240-second interval, or 3 days at a 1-second interval.
RS485 and RS232 interfaces with Modbus RTU protocol, baud rates from 1200 to 19200 bps.