The Hongrun NHR-D300 series voltage/current meter is a small-sized, economical digital electric measuring instrument that is mainly used to measure the alternating voltage, direct voltage or alternating current, direct current in the electrical circuit in real time, and use the LED digital tube to display the digital reading. The product has the advantages of good stability, strong anti-interference, high cost-effectiveness, and small product size, which can be directly replaced with the original pointer instrument. It is widely used in stabilizers, spot welders, calibrators and various electrical equipment or systems with certain limitations on the size of the meter.
The Hongrun NHR-D300 Series is a small, economical digital electrical meter made by Hong Run Precision Instruments. It measures AC voltage, DC voltage, AC current, or DC current in electrical circuits and displays the reading directly on a red LED digital display. The document describes it as stable and resistant to interference, with a small body that can replace pointer meters; it is used in voltage stabilizers, spot welders, calibration benches, and electrical equipment or systems with limited meter space.
The Chinese manual covers the product introduction, technical parameters, dimensions and panel cutout, model spectrum, wiring, and decimal-point setting. It lists AC/DC voltage ranges up to 600 V, AC current ranges to 2 A, and DC current ranges to 200 A with an optional shunt for the 20 A and 200 A ranges. This manual is written in Chinese.
| AC voltage ranges | 0.2 V / 2 V / 20 V / 200 V / 600 V |
|---|---|
| AC current ranges | 2 mA / 20 mA / 200 mA / 2 A |
| DC voltage ranges | 0.2 V / 2 V / 20 V / 200 V / 600 V |
| DC current ranges | 2 mA / 20 mA / 200 mA / 2 A / 20 A / 200 A; 20 A and 200 A require an optional shunt |
| Display range | 0 to ±1999; decimal point can be switched by a short-circuit ring on the internal PCB |
| Display | 3.5-digit red LED, 0.56-inch or 0.8-inch |
| Withstand voltage | AC 1500 V for 1 min at 50 Hz |
| Insulation resistance | 500 MΩ at DC 500 V |
| Operating temperature | 0 to 50 °C (no condensation, no freezing) |
| Relative humidity | 25% to 85% RH |
| Storage temperature | -10 to 60 °C (no condensation, no freezing) |
| Power supply | AC 220 V ±10% (50/60 Hz); AC/DC 12–32 V |
It measures AC voltage, DC voltage, AC current, or DC current in electrical circuits and shows the reading on an LED digital display.
The meter can use AC 220 V ±10% (50/60 Hz) or AC/DC 12–32 V.
Yes, the decimal point can be switched using a short-circuit ring on the internal PCB.
The 20 A and 200 A DC current ranges require an optional shunt.