The Hong Run OHR-EC10 series conductivity online monitor user manual provides installation, operation, calibration, and communication instructions for…
This manual describes the OHR-EC10 series conductivity online monitor, a device for continuous measurement and control of water conductivity (TDS) in applications such as reverse osmosis, ultrapure water, cooling water, boiler water, and industrial processes. It explains product features, technical parameters, and safety precautions.
The guide covers installation options (panel, wall, pipe), wiring diagrams, menu navigation, parameter setting, alarm configuration, calibration procedures for electrodes and temperature, and RS485 Modbus RTU communication. It also provides specifications, troubleshooting tips, and regulatory information. This manual is written in Chinese.
| Conductivity measurement range | 0.00 µS/cm – 40.0 mS/cm |
|---|---|
| Resistivity measurement range | 0.00 MΩ·cm – 20.00 MΩ·cm |
| TDS measurement range | 0 ppm – 1999 ppm |
| Temperature measurement range | -10.0 °C – 130.0 °C |
| Output signals | 4–20 mA, 1–5 V, 0–10 mA, 0–5 V, 0–20 mA, 0–10 V |
| Power supply | AC220 V ±10 % (50 Hz) |
| Protection rating | IP65 |
| Display | 3.5‑inch 128×64 LCD, backlight, bilingual |
The monitor can be installed as a panel‑mounted (盘装式), wall‑mounted (壁挂式), or pipe‑mounted (管道式) unit.
Two relay contact outputs are provided, each rated for AC 220 V / 3 A or DC 30 V / 3 A.