Honeywell GasAlertMicro 5 Portable Gas Detector INMETRO Conformity Certificate

DNV GL conformity certificate DNV 12.0138 X for the Honeywell BW GasAlertMicro 5 portable gas detector, covering models M5, M5PID and M5IR.


Honeywell GasAlertMicro 5 Portable Gas Detector INMETRO Conformity Certificate - cover page
Brand
Honeywell
Category
detectors
Document type
Other
Language
Portuguese
Pages
6
File format
PDF
File size
503 KB
Published
09 November, 2026
Updated
09 November, 2026
MD5 checksum
11D71CA2E08A063EFEC017BFB79E489F

About this manual

This is certificate no. DNV 12.0138 X – Revision 02 issued by DNV GL Business Assurance Avaliações e Certificações Brasil Ltda, dated 06 September 2016 and valid until 05/11/2019. It covers the portable gas detector GasAlertMicro 5, requested and manufactured by BW Technologies by Honeywell in Calgary, Canada, with System Sensor de Mexico added as a manufacturer in revision 1. The equipment was assessed against ABNT NBR IEC 60079-0:2013, 60079-1:2009 and 60079-11:2013, with testing by CSA International, under INMETRO Portaria no. 179 of 2010 (model 5 with manufacturer quality management system assessment).

The equipment description covers models M5, M5PID and M5IR, used for continuous, simultaneous monitoring of up to five gases (oxygen deficiency, combustible gases LEL/CH4, CO, H2S, IR CO2, volatile organic compounds and/or one toxic sensor). It describes the diffusion and pumped versions, the LCD readout, audible, visual and vibration alarms, approved battery types and the marking Ex ia IIC T4 Ga for M5/M5PID and Ex d ia IIC T4 Gb for M5IR. The notes require batteries to be changed only in non-classified areas, define the product marking and state the responsibilities of manufacturer, installer and user, followed by a revision history. This manual is written in Portuguese.

What's inside

  • Product and model identification
  • Applicant and manufacturers
  • Technical standards
  • Testing laboratory and test report
  • Equipment description
  • Model code (M5-XWT1T2-R-P-D-A-B-CC)
  • Battery modules
  • Descriptive documentation
  • Marking
  • Notes and revision history

Specifications

Gases monitoredUp to 5 gases simultaneously: oxygen (deficiency), combustible gases (LEL/CH4), CO, H2S, IR CO2, volatile organic compounds and/or 1 toxic sensor
Ambient temperature range-20 °C to +50 °C
Temperature classT4 with the encapsulated Li-Poly battery
Marking, models M5 and M5PIDEx ia IIC T4 Ga, -20 °C ≤ Ta ≤ +50 °C
Marking, model M5IREx d ia IIC T4 Gb, -20 °C ≤ Ta ≤ +50 °C
Approved alkaline batteriesDuracell MN1500 or Energizer E91
Rechargeable battery packM5-BAT01 containing 3 Sanyo HR-3U-2300AAAB or HR-3U-2500AAAB cells
Sampling versionsDiffusion and pumped; the pumped version is fitted with a sampling pump

Frequently asked questions

How many gases can the GasAlertMicro 5 monitor at the same time?

Up to five gases are monitored continuously and simultaneously: oxygen deficiency, combustible gases (LEL/CH4), carbon monoxide, hydrogen sulfide, IR carbon dioxide, volatile organic compounds and/or one toxic sensor.

What is the ambient temperature range of the GasAlertMicro 5?

The total ambient temperature range for the equipment is -20 °C to +50 °C; the temperature class is T4 when the encapsulated Li-Poly battery is used.

Which batteries can be used in the detector?

Alkaline Duracell MN1500 or Energizer E91 cells, or the rechargeable lithium packs M5-BAT08A / M5-BAT08B.

Where may the batteries be replaced?

The certificate states that batteries must only be changed in non-classified (non-hazardous) areas.

Download PDF (503 KB)

More Honeywell Manuals


View all Honeywell manuals →