Owner's manual for the Harman TL2.6 non-catalytic, top-load wood burning room heater, covering installation, operation, venting, and maintenance.
This owner's manual covers the Harman TL2.6 non-catalytic, top-load wood burning room heater. It includes listing and code approvals, carbon monoxide warnings, installation and location requirements, dimensions and clearances, chimney and venting requirements, mobile home installation, appliance setup, operating instructions, and service and maintenance.
The manual states that the stove uses the Firedome Plus secondary combustion system, is approved for mobile home installation in the US only, and is certified to 2015 particulate emission standards. It warns against burning wet or green wood, overfiring, and using unapproved fuels, and recommends professional cleaning and servicing annually.
| Model | TL2.6 |
|---|---|
| Type | Non-Catalytic, Top Load, Wood Burning Room Heater |
| Vent Size | 6 Inch (152 mm) |
| Firebox Size | 2.6 cu. ft. |
| Maximum Wood Length | 18" |
| Fuel | Seasoned Cordwood (20% moisture) |
| EPA Certified Emissions | 3.7 g/hr |
| LHV Tested Efficiency | 85.7% |
| HHV Tested Efficiency | 79.3% |
| EPA BTU Output | 11,300 - 32,700 |
| Peak BTU/Hour Output | 69,300 |
| Glass | 5mm ceramic glass |
| Optional Blower Electrical Rating | 115 VAC, 60 Hz, <1 Amps |
| EPA Certification Number | 862 |
| Standards | UL1482-11, UL737-11 & ULC S627-00, EPA Method 28 & 5G |
The stove is tested and approved for dry, seasoned cordwood only. Do not burn wet or green wood, and burning any other type of fuel will void the warranty.
Yes, it is approved for installation in mobile or manufactured homes in the US only. The unit must never be installed in a room designated for sleeping and must have provisions for an outside air source.
The vent size is 6 inch (152 mm) and the firebox size is 2.6 cu. ft.
It is strongly recommended to have the stove professionally cleaned and serviced annually, including all parts of the stove and the venting system.