Growatt MID TL3-X and MID TL3-XL series PV inverter installation and operation manual covering wiring, commissioning, troubleshooting and specifications.
This Growatt New Energy installation and operation manual (document number GR-UM-160-A-00) covers the MID TL3-X and MID TL3-XL series photovoltaic inverters, including the MID 6KTL3-XL through MID 12KTL3-XL and MID 10KTL3-X through MID 25KTL3-X models. It is written for qualified personnel and professional electricians who install, commission and maintain the equipment.
The manual explains the product description and features, unpacking and inspection, installation requirements and wall mounting, AC and DC side wiring, signal line connection, debugging, operating modes, the OLED display and touch buttons, RS485/DRM/USB-A communication and monitoring, fan maintenance, troubleshooting and specifications. Growatt describes the series as converting the direct current from PV panels into three-phase alternating current for delivery to the grid, with dual maximum power point tracking and two strings.
| Input voltage range | 200V-1000V |
|---|---|
| Maximum efficiency | up to 98.65% |
| Protection level | IP65 |
| Weight | 23 kg |
| Dimensions (MID 10-25KTL3-X, MID 6-12KTL3-XL) | 525 mm (H) x 394 mm (W) x 221 mm (D) |
| Maximum input DC voltage | 550 V |
| Storage temperature | -25 °C to +60 °C |
| Storage relative humidity | less than 90% |
| Maximum carton stacking layers | 4 |
| Communication | RS485 / WiFi / GPRS / 4G |
| Minimum clearance | Above 300 mm; under 500 mm; both sides 500 mm; forward 300 mm |
It covers the MID TL3-X models MID 10KTL3-X to MID 25KTL3-X and the MID TL3-XL models MID 6KTL3-XL to MID 12KTL3-XL.
The inverter must be installed by a professional electrician qualified by the relevant department.
Yes. The machine has degree of protection IP65 and can be installed indoors and outdoors, but direct strong sunlight is not recommended.
The input DC voltage must not exceed 550V under any circumstances, as higher voltages may permanently damage the machine.
Leave at least 300 mm above and forward, 500 mm under and 500 mm on both sides.