User guide for the Extech 381676 pen multimeter with non-contact AC voltage detection, covering safety, controls, and measurement steps.
The Extech 381676 is a pen-style multimeter with a built-in non-contact AC voltage detector. This user guide covers its controls, display symbols, safety precautions, and measurement procedures.
Supported measurements include AC and DC voltage, resistance, diode, and continuity, with automatic range selection and data hold/max hold functions. The guide also lists maximum input limits and an automatic 15-minute power-off feature. This manual is written in Chinese.
| AC voltage detection range | 50 to 600 VAC |
|---|---|
| Maximum input (all ranges except 200 mV) | 600 VDC or VAC |
| Maximum input (200 mV range) | 250 VDC or AC |
| Maximum input (resistance, continuity, diode) | 250 VDC or VAC |
| Overvoltage category | CAT III 600 V |
| Pollution degree | 2 |
| Auto power off | 15 minutes |
| Continuity buzzer threshold | about 50 Ω |
| Diode forward voltage (good diode) | about 0.3 V (germanium) to 0.7 V (silicon) |
It can measure AC and DC voltage, resistance, diode, continuity, and non-contact AC voltage.
It detects AC voltage from 50 to 600 VAC.
It turns off automatically after 15 minutes of inactivity.
The buzzer sounds when the resistance is less than about 50 Ω.